Introduction to the power of attorney of the company: 1. First of all, you can describe the information about the company's principal and the company's trustee. 2. Secondly, it can describe the main contents entrusted by the company. Finally, you can describe the signing date and validity period of the power of attorney.
Model power of attorney 1
Party A: Maya Station of Headquarters
Party B: Head Office Repair Shop
In order to eliminate potential safety hazards in time and ensure passenger safety, Party A and Party B hereby sign this power of attorney through consultation. Details are as follows:
First, the key inspection items and requirements of vehicles
(1) Steering system:
1. The horizontal (straight) tie rod, steering ball pin, steering gear, steering knuckle and arm are free from cracks and damage, and the ball pin is free from looseness; Steering gear and seat are installed firmly.
2. All components shall be connected completely and in good condition, and locked reliably. It is not allowed to replace the standard cotter pin with iron wire and half pin.
3. The steering wheel is flexible in rotation, easy to operate and free from jamming. In any operating position, the steering system must not interfere with other components.
(2) Brake system:
1. No oil or gas leakage.
2. The service brake system works normally, and all connecting pins are complete, intact and reliable.
3. The handbrake is effective and the barometer works normally.
4. Various rods and tubes of the braking system should not interfere or rub with other components in relative displacement.
5. The gas storage tank and brake pipe should be fixed firmly.
(3) Transmission system: the transmission shaft and universal joint should be free of cracks and looseness; The bolts of all connecting parts are complete, intact, firm and reliable.
(4) Lighting: Headlights, anti-fog lights, turn signals, small lights, brake lights and taillights are firmly installed, intact and effective; The rain cover works normally.
(5) Fuel supply system:
1. There shall be no oil leakage and no direct oil supply with other tools.
2. The fuel tank and tubing should be firmly fixed.
(6) Tires:
1. There should be no serious wear, and there should be no cracks and cuts on the tread and sidewall that are longer than 25mm or deep enough to expose the tire ply.
2. Crown tread depth: the front wheel shall not be less than 3.2mm, and the rest tires shall not be less than1.6mm. ..
3. There should be no defects, abnormal wear and deformation that affect the use, and the tread should not be exposed due to local wear.
4. The tire pressure meets the requirements; Coaxial tires should be consistent in size and pattern shape.
5. The tire nut is complete and should not be loose.
(7) Suspension: There should be no fracture or displacement.
(8) Vehicle safety facilities: equipped with triangular wood, fire extinguisher and safety hammer. Fire extinguishers and triangular wood should be placed in places convenient for drivers and passengers.
Second, related responsibilities
1. Party B must improve self-safety awareness, and the vehicle in Shangdigou can only be inspected after the driver turns off the engine. In case of safety accidents caused by illegal operation, Party B shall be responsible for economic losses and legal consequences.
2. If Party B fails to carry out safety inspection on Party A's vehicles according to regulations and is found out by the Safety Supervision Bureau or the industry management department, Party B shall be responsible for the fine.
Third, wage payment.
For each vehicle inspected by Party B, Party A shall pay Party B an inspection fee of 65,438+00 yuan, which shall be paid by Party A after verifying the number of vehicles inspected at the end of the month.
Fourth, the job requirements
Inspection records must be made for vehicles that have been inspected, and the inspection should be serious and responsible, so as not to miss the inspection. Vehicles that have been inspected for potential safety hazards shall not be issued with safety inspection certificates. The hidden dangers found in the safety inspection on that day must be registered in detail, and the record ledger should be made, and the staff of Party A will be responsible for recovering and keeping them at the end of the month.
Cooperate with Party A's safety technical unit to do the spring inspection, annual inspection, annual inspection and safety inspection of vehicles in each period.
For vehicles with potential safety hazards, the driver must be supervised to go to the site for maintenance, and the platform inspection sheet can only be issued after the re-inspection is qualified. The platform checklist can only be issued after the potential safety hazards are eliminated.
4, check carefully, seriously, not perfunctory, to find out the hidden dangers must be thoroughly rectified. If a traffic accident or mechanical accident is caused by careless work and the vehicle under inspection "running with illness", which causes heavy economic losses or casualties, it shall bear corresponding economic losses and legal responsibilities.
This letter of commitment is made in duplicate and shall come into effect as of the date of signing.
Party A (seal): Party B (seal):
_ _ _ date
Model essay on company power of attorney II
Customer:
Trustee:
Entrusting matters:
Permission of the Principal to correct relevant materials:
1, agree □ disagree □ modify any materials;
2. Agree □ Disagree □ Error in modifying the text of the enterprise's own documents;
3. Agree □ Disagree □ Modify the wrong filling in relevant forms;
4. Other matters that have the right to correct.
The term of validity of the entrustment is from year month day to year month day.
Customer ID card (copy)
Date, year and month
(Seal or signature of the client)
note:
1. Seal or signature of the client: the registration of the establishment of a limited company or an enterprise without legal person shall be sealed and signed by shareholders and investors (natural person shareholders); The registration of the establishment of a joint stock limited company shall be signed by all directors; The change and cancellation of registration of a company or an unincorporated enterprise shall be sealed by the enterprise.
2. Authorized person's authority to correct relevant materials: 1, 2, 3, select "Agree" or "Disagree" and tick □; Item 4 shall be filled in by itself according to the authorized content.
Company power of attorney model essay 3
Guilin _ _ _ Pharmaceutical Tendering Co., Ltd.:
As a part of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Our company guarantees that:
The drug certification materials provided by 1. meet the requirements of this tender document.
2. The administration quality meets the national implementation standards.
3. Once the invested drugs win the bid (clinch a deal) and the purchase and sale contract is signed according to law, the drug price will not be raised without authorization, and the production (or agency) behavior will not be stopped during the procurement cycle, and sufficient supply will be guaranteed to the winning enterprises in time. If there is any violation, bear the liability for breach of contract according to law.
The power of attorney is valid from _ _ _ _ to _ _ _ _ _.
Name of entrusted enterprise (seal): _ _ _ _ _ _ _
Legal representative of the entrusted enterprise (signature): _ _ _ _ _ _
Date of signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Entrusted bidder (signature): _ _ _ _ _ _ _ _ _ _ _
Date of signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
The above is what Bian Xiao shared today, and I hope it will help everyone.