1. Adjust the top dead center: the electronic cam controller has self-checking function, which can automatically correct the angle deviation, but if the deviation is too large, it needs to be adjusted manually. The specific method is: press the "stop top dead center" key to enter the adjustment mode. Press "+"or "-"to increase or decrease the angle value, press "OK" to save the settings, and press "Exit" to exit the adjustment mode.
2. Adjust the braking angle: the electronic cam controller can automatically adjust the braking angle according to different working conditions, but if manual adjustment is needed, the specific method is: press the "braking angle" key to enter the adjustment mode, and press the "+"or "-"key to increase or decrease the angle value.