Kitchen partition door manufacturer:
1. Kitchen partition door brand-Sophia, top ten brands of whole wardrobe, top ten brands of bookcase/sliding door, favorite brands of consumers, president of wardrobe professional committee of Furniture Decoration Chamber of Commerce of the All-China Federation of Industry and Commerce, influential building materials brand in South China, and listed company in customized wardrobe industry.
2. Kitchen partition door brand-Guangdong Dinggu Jichuang Home Furnishing Co., Ltd., top ten brands of hardware fittings, top ten brands of sliding doors, top ten brands of fashion doors and ecological doors, national protection trademarks, famous trademarks in Guangdong Province, high-tech enterprises in Guangdong Province, private technology enterprises in Guangdong Province, leading brands of decorative building materials and home furnishing with equal emphasis on professionalism and fashion.
3. Kitchen partition door brands-Stanley Pinpu Hardware Home (Shenzhen) Co., Ltd., Stanley, top ten brands of sliding doors-sliding doors, top ten brands of custom wardrobes, 1843 was founded in the United States, a century-old classic flagship tool, security system and home brand, and the director unit of China Overall Home Alliance.
How to install the kitchen partition door;
1. How to install the kitchen partition door? Track the installation of the system. Before the partition installation, check the tracks assembled by track components in sequence on the floor; Mark the track line and place the bracket in a specific position; Install the track bracket on the ceiling; Check whether the movable partition wall is firmly fixed on the track. When the track and bracket must be stored loosely in the storage area, so that the bracket plate can be moved to other places; Before adjusting the main track facilities, the proper position of the storage track should be measured. This is very important for the placement of intersections.
2. How to install the kitchen partition door? For the installation of track facilities, when the partition is hung on the track, the track that escapes from the exit can be removed without rebuilding the crane; It must be a special bracket guide rail connection for the escape exit guide rail; When installing the track, the construction should be carried out according to the accurate data adjusted during the measurement.
3. How to install the kitchen partition door? Track adjustment, remember that the track above the bracket is loose enough. Guarantee the pause time of the track; Tighten the rail connection, correctly adjust the horizontal height of the rail, and the installation direction of the rail must also be horizontal and vertical; When installing track facilities, it is necessary to install sound insulation and mineral wool; There are "L", "T" and "X" joints on the track for turning connection, with "L", "T" and "right" points.
4. How to install the kitchen partition door? Feasible wallboard, open the escape exit track; According to the tracking system, remember to fix it on the track in the correct order; Before closing the movable partition, adjust the height of the carrier and check the right angle of the track to make the track partition run well; Check the vertical condition of the partition. If it is not damaged, it can enter the edge of the aluminum frame with rubber seal vertically without bending (if the connection is inappropriate.
The above article is a small summary of the brand and installation method of kitchen partition door. I hope the above contents are helpful to you. In fact, many people feel confused and at a loss because they can't fit the kitchen partition door. Bian Xiao hopes that this introduction will help everyone.