Commitment letter on environmental protection and safety

Commitment letter of environmental protection and safety 1 I am a regional employee of the department. In order to protect my health, life safety, good working environment and property safety of the company, and prevent and reduce production safety accidents, environmental pollution and occupational hazards, I solemnly promise that I will strictly perform the following duties in my 20xx years of work:

A, understand the department's safety and environmental assessment objectives, and strive to achieve safety goals in the work.

The second is to strictly implement the safety management concept of "safety first, quality second and operation third" and implement the post safety production responsibility system. Strictly implement the company's current environmental management system to save energy and reduce emissions.

Three. Accept safety production education and cleaner production education and training, seriously study and strictly abide by the rules and regulations, operating procedures, process indicators of the company and departments, as well as laws, regulations and standards related to safety production and environmental protection, master the knowledge and skills of safety and environmental protection in this position, and put an end to illegal operation and illegal discharge.

4. Refuse to command and force risky operations in violation of regulations, refuse to violate environmental protection laws, and promptly criticize, report and correct the illegal command and force risky operations put forward by superiors.

Five, strictly abide by labor discipline, do not do things unrelated to work during working hours.

6. Be familiar with the hazards, environmental factors and MSDS of hazardous chemicals in workplaces and jobs, master the preventive measures and emergency measures of hazards and hazardous chemicals, and be familiar with the control measures of environmental factors.

Seven, seriously carry out the safety team, environmental inspection work, timely find and solve the safety and environmental protection problems or hidden dangers in production, and report the safety and environmental protection problems or hidden dangers that they can't solve in time according to the procedures.

Eight, familiar with the configuration and use of fire control facilities in this area, can use fire control facilities correctly and skillfully, and master emergency escape methods. Be familiar with the environmental emergency disposal process and correctly handle environmental emergencies.

Nine, strictly implement the relevant requirements of on-site management, environmental front-end management and occupational health protection, and constantly improve the production and working environment, prevent and reduce occupational hazards.

Ten, in the work to do "four don't hurt", that is, don't hurt yourself, don't hurt others, don't be hurt by others, protect others from harm.

XI。 Adhere to the principle of "everyone is responsible for safety production" and "everyone is responsible for environmental protection", and actively put forward their own opinions or suggestions on safety and environmental protection problems existing in the work, so as to continuously improve the safety and environmental protection work of the company.

Twelve, when an accident occurs, in the case of ensuring safety and reducing pollution, actively carry out rescue. 13. If the above responsibilities are not strictly performed in the work, consciously accept the company's handling.

Commitment:

Date, year and month

Environmental Protection and Safety Commitment 2 Project Name:

Project address:

Scope of contract:

Contract method:

Engineering construction contract number:

Project duration: from the date of commencement to the date of completion.

In order to ensure the smooth implementation of Party A's projects contracted by our company, our company makes the following commitments to Party A and competent departments at all levels:

1. During the construction period, we will strictly abide by the laws and regulations on safety production and environmental protection, implement the rules, regulations and technical standards on safety production and environmental protection, abide by Party A's safety and environmental protection management system, and accept Party A's safety and environmental protection supervision, inspection and assessment.

2. As the main body of responsibility, we are fully responsible for the safety accidents, adverse environmental impacts and all costs and losses caused by the construction during and after the construction content is put into use (including the liability for damages caused to third parties), and are willing to accept the punishment given by Party A according to the severity of the safety accidents and voluntarily give up Party A's defense.

Third, establish and improve our safety production and environmental protection responsibility system and safety and environmental protection education and training system, and formulate corresponding operating procedures; We designate a special person to be responsible for the safety of this project to ensure the capital investment required for safe and civilized construction. Provide safety protection articles and safety protective clothing to construction personnel, and inform in writing the contents of safety and environmental risks of posts with high safety and environmental risks, as well as the related safety and environmental operation procedures and the hazards of illegal operations.

Fourth, do a good job in safety production and environmental protection education and training for construction personnel, and issue employment certificates to those who pass the examination. During the construction period, Party B will conduct safety education and training for construction personnel from time to time. Without education and training or education and training examination unqualified personnel, shall not be arranged.

Work at the post. Project leaders and special operators must obtain valid qualification certificates.

5. Before the construction operation, prepare the construction organization design, construction scheme, safety technology and environmental protection measures, report them to the relevant departments for examination and approval, handle the construction permit, and file with Party A at the same time; Formulate and implement emergency plans for production safety and environmental protection, and report them to Party A for the record.

Six, before the construction work, the technical personnel responsible for project management should explain the technical requirements of safety and environmental protection construction to the construction team and workers in detail. During the construction period, we will take necessary safety protection and environmental protection measures, and the operators will strictly abide by the rules and regulations of safety production and environmental protection and the operating procedures of safety and environmental protection.

Seven, the construction site to set up the necessary warning signs of construction work, equipped with fire-fighting facilities and fire-fighting equipment, safety and environmental warning signs are complete, construction machinery and materials are placed in an orderly manner, and shall not block the safety fire escape and affect the operation and patrol inspection of post personnel.

Eight, the construction personnel to enter the construction site to wear labor protection articles in line with national standards and the provisions of the construction unit, take the initiative to show the construction contact list, temporary hot card and temporary line use certificate, and approved by Party A's doorman inspection before entering and leaving. Construction workers are not allowed to lend their employment certificates.

Nine, the construction site and construction machinery and equipment, etc. Conduct regular and irregular safety inspections, and make inspection and rectification records. Timely feedback the rectification results in writing to the problems raised by Party A or the supervisor hired by Party A. ..

Ten, all kinds of auxiliary materials (equipment) needed in the construction must have the product certificate, the installation and use of auxiliary equipment should comply with the safety and environmental protection management regulations, and strictly implement the safety and environmental protection operation procedures.

Eleven, the quality of raw materials used in the construction after careful inspection qualified rear can use. Twelve, the construction involves the use of open flames, temporary electricity, into confined spaces, high places and other operations, to have the corresponding work permit.

Thirteen, timely eliminate hidden dangers of accidents, put an end to the phenomenon of "three violations", and report accidents and incidents of safety production and environmental protection quickly and truthfully.

14. We will abide by relevant laws, regulations and other requirements and take effective measures to control them.

Control noise, dust and air pollution, and protect the working environment and the occupational health of workers and people around them.

15. We will take effective measures to control energy and resource consumption and put an end to environmental pollution caused by emissions.

16. Construction waste shall be piled up and treated at the designated place, especially hazardous waste shall be piled up and treated in strict accordance with the requirements, so as to ensure that the site is cleared after work and prevent potential safety hazards and environmental pollution.

17. During the acceptance or evaluation of contract implementation, we and Party A shall accept the implementation and control results of safety protection and environmental protection measures during the contract implementation.

Eighteen. Other commitments are attached to the contract, and this letter of commitment has the same legal effect as the terms of the contract.

This undertaking is made in quadruplicate, with Party A holding three copies and Party B holding one copy.

Commitment unit:

Representative (signature):

Date, year and month

Commitment letter of environmental protection and safety 3 In order to implement the responsibility of safety and environmental protection and achieve the goal of safety and environmental protection in 20xx, I solemnly promise to the first person in charge of this unit according to the requirements of the signed annual responsibility letter of safety and environmental protection:

First, strictly abide by the relevant safety and environmental protection management rules and regulations of the unit and its superiors, and conscientiously implement various safety operation procedures.

Two, put an end to the "three violations" behavior (violation of labor discipline, illegal command, illegal operation), timely stop and report unsafe behavior.

Third, be familiar with the risks and harmful factors existing in this position, implement risk control measures, refuse unsafe operations, and master accident emergency measures.

Four, put an end to safety and environmental liability accidents.

Verb (abbreviation of verb) actively accepts safety and environmental protection training, education and assessment, and further enhances my safety and environmental protection awareness and operational skills.

Six, actively cooperate with the unit leaders to do a good job in safety and environmental protection.

I must conscientiously fulfill the above commitments and consciously accept supervision at all levels. Relevant provisions on breaking promises and voluntarily accepting investigation and handling.

Commitment:

Work unit:

Date, year and month

I am a regional employee of the department. In order to ensure the health, life safety, good working environment and company property safety of my colleagues and me, and to prevent and reduce production safety accidents, environmental pollution and occupational hazards, I hereby solemnly promise that I will strictly perform the following duties in my 20xx years of work:

A, understand the department's safety and environmental assessment objectives, and strive to achieve safety goals in the work.

The second is to strictly implement the safety management concept of "safety first, quality second and operation third" and implement the post safety production responsibility system. Strictly implement the company's current environmental management system to save energy and reduce emissions.

Three. Accept safety production education and cleaner production education and training, seriously study and strictly abide by the rules and regulations, operating procedures, process indicators of the company and departments, as well as laws, regulations and standards related to safety production and environmental protection, master the knowledge and skills of safety and environmental protection in this position, and put an end to illegal operation and illegal discharge.

4. Refuse to command and force risky operations in violation of regulations, refuse to violate environmental protection laws, and promptly criticize, report and correct the illegal command and force risky operations put forward by superiors.

Five, strictly abide by labor discipline, do not do things unrelated to work during working hours.

6. Be familiar with the hazards, environmental factors and MSDS of hazardous chemicals in workplaces and jobs, master the preventive measures and emergency measures of hazards and hazardous chemicals, and be familiar with the control measures of environmental factors.

Seven, seriously carry out the safety team, environmental inspection work, timely find and solve the safety and environmental protection problems or hidden dangers in production, and report the safety and environmental protection problems or hidden dangers that you can't solve in time according to the procedure.

Eight, familiar with the configuration and use of fire control facilities in this area, can use fire control facilities correctly and skillfully, and master emergency escape methods. Be familiar with the environmental emergency disposal process and correctly handle environmental emergencies.

Nine, strictly implement the relevant requirements of on-site management, environmental front-end management and occupational health protection, and constantly improve the production and working environment, prevent and reduce occupational hazards.

Ten, in the work to do "four don't hurt", that is, don't hurt yourself, don't hurt others, don't be hurt by others, protect others from harm.

XI。 Adhere to the principle of "everyone is responsible for safety production" and "everyone is responsible for environmental protection", and actively put forward their own opinions or suggestions on safety and environmental protection problems existing in the work, so as to continuously improve the safety and environmental protection work of the company.

Twelve, when an accident occurs, in the case of ensuring safety and reducing pollution, actively carry out rescue. 13. If the above responsibilities are not strictly performed in the work, consciously accept the company's handling.

Commitment:

date month year