Reflection on factory safety accidents (I) On August 3rd, xxxx, a safety accident occurred in our carbon factory. When Xiang et al. cooperated in dismantling the anode guide rod in the assembly workshop, they found that the equipment failure was not reported and the operation was illegal, which led to the fracture of the right thigh of Xiang. There are many reasons for this accident, such as unreliable catenary clock, uneven stress on guide rod and internal injury of anode steel claw. These are objective reasons, and there are also some subjective reasons: weak safety awareness, illegal operation when standing on the equipment, failure to stop the operation after the control of the catenary trolley, and employees' insufficient understanding of the danger of the anode steel claw not being dismantled. After the accident, the synthetic carbon plant and the safety and environmental protection department of the company carried out detailed analysis on the cause of the accident for many times in line with the principle of "never letting the accident go", imposed severe economic punishment on the person responsible for the accident, and conducted a safety education for the employees.
As a monitor, I realize that the lesson of this accident is profound. The accident not only caused losses to the enterprise, but also brought economic losses to the responsible person and related personnel, and caused irreparable mental pain to the individual. After thinking about it, I feel the importance of safety more and have a deep understanding of how to further do a good job in safety.
First, improve safety quality and prevent accidents. The main source of this accident is that the operator lost his awareness of the predictability and consequences of the accident at a critical moment, which is what he usually calls safety luck. Therefore, to grasp safety production, we must pay special attention to the education and improvement of people's safety culture quality and safety thought and behavior.
Second, improve the safety awareness of employees in many ways. Safety work has only a starting point and no end point. All employees should teach each other, learn from each other, learn from each other's strengths and improve together. To form a good habit of paying attention to safety, operators should also be diligent in five aspects on the premise of knowing three things and four things. Only in this way can the safety of production be better guaranteed.
Third, establish the concept that safety is benefit. At present, the company is vigorously carrying out activities to reduce costs and increase efficiency. As a front-line employee, doing a good job in production safety is the best way to reduce costs and increase efficiency. At work, we should not only master various operating procedures skillfully, but also develop good safe operating habits, put an end to habitual violations, and dare to be serious with unsafe behaviors around us. Every employee should supervise each other in their daily work, remind each other and eliminate potential safety hazards in time.
As long as everyone pays attention to safety, always pays attention to safety, puts safety in mind and eliminates any tolerance for safety work, the company's safety work will certainly be better.
Reflections on factory safety accidents (2) Today, I heard the monitor read through the reports of two accidents. As a marketer, I am deeply touched! Most of the reports I heard before were power distribution accidents, but today they are accidents of marketers, and I can't help worrying about the safety of myself and my colleagues. Personal injury and death accidents bring irreparable harm to individuals and families, and also seriously hit the morale of employees and affect the working atmosphere of enterprises. Therefore, with life safety, we can work better and not let our families and leaders worry. Today, my heart is heavy. I think it's very important to reflect on our own obsolescence and maintain the existing safety attitude. Everyone is careless sometimes, but as an electrician, you can't have a careless attitude and careless actions. Because as an electrical worker, we should have the belief of safety first. Don't be opportunistic and don't work illegally. Usually the beginning of an accident is caused by carelessness and negligence. ? Electricity? It brings light and convenience to people, but for electric workers, they should pay attention to their own safety while ensuring to send light to thousands of families. While listening to the report, I also thought of myself, my past and present, right? Is it safe? How much do you know about these two words? It is always because someone has an accident or the leader has read the report that he has a little safety awareness in his heart. Why is this happening? Because the previous accident reports were mainly about power distribution accidents. Some things have nothing to do with my heart. The more I listen to it today, the more scared I am, because these two incidents are all accidents of marketers. Think about it. What if it was me? What do you expect me to do? Can I be as careless as the people in the accident? When things have been going smoothly, people began to ignore some important things. Take me for example, I have been working for three years, and my previous work paid great attention to safety. No matter what business I do, I always follow the steps of cutting off the power first and then checking the power. Now I'm a little irresponsible for my own safety. When changing the electric meter, the power is cut off from time to time. When you see the broken meter box, you can read the meter directly without knowing the electricity test. I was a little scared at first, but it became a habit. After nothing happened, it became a work habit. But through these two reports, I am ashamed of what I have done and forget about safety for convenience. I didn't really pay attention to the safety regulations, didn't implement the safety regulations in my own work, and didn't remember the entrustment of the master and the leader. Now all I have in mind is fear. Don't think I can fight against 220 volts without following the rules. Things tend to get smaller and bigger. Only by paying attention to small things first can we avoid big accidents. I can't do this anymore. I am responsible for myself, my family and my leaders. I can't joke about my life. I am an electric worker, and I will always take safety as my motto. You can't work by habit anymore. Before you go to work, you must follow the safety rules and procedures, not rely on? Nothing? ,? Work fast like this? Come to work. We should do our work carefully and correctly, so that we can go to work safely and get off work happily. Future security research, whether it's about yourself or not, is all about
You should seriously reflect on yourself, have you ever made such a mistake, and what should you do when you encounter such a thing? Can we not make the same mistakes and mistakes? The study of safety regulations should be carefully studied, and every regulation should be carefully read, understood and thoroughly. Whenever you work, you should think about what is written in the safety regulations. You shouldn't do what you want to do and work with the belief that safety regulations are lessons from the past. You can't make the same mistake. Because of my little mistake, not only my life is gone, but also my family's injury and pain, and the leader's disappointment and trouble with you. This accident report is so touching and instructive for me, which makes me deeply feel the significance of safety and the disadvantages in my work, and makes me deeply realize that safety is not only for myself, but also for everyone. I represent not only myself, but also my family, my unit and the whole power system. Only by starting from me can everyone around me pay attention to safety. In my future work, I will always ensure that everyone has a clear mind and consciousness, pay attention to every detail in the work, stop doing everything with my own habits, and firmly remember the safety rules. Only when I do it myself can I slowly illuminate people around me with my tiny light, and people around me can do well and have better power grid construction and development.
Reflection on Factory Safety Accidents (III) At 201February 23 14: 00, an explosion occurred in a chemical plant of Li Quan Chemical Co., Ltd., Houzhai Street, wuxi new district City, Jiangsu Province. According to the residents around the explosion site, at that time, the welding workers in the factory
Welding sparks accidentally spilled, causing chemical raw materials placed in the factory to burn in case of fire. After the fire spread to the sewage outlet, the factory led to the inland river, and the second fire point was lit again.
The fire started from the river and destroyed a small bridge. Because most of the chemical raw materials in chemical plants are flammable, once they encounter sparks, they will also cause connection explosion accidents. The explosion accident of Wuxi chemical plant is an obvious example, which is very harmful.
Then. So how can we prevent the frequent explosion accidents in chemical plants?
First of all, there must be fire-fighting equipment in the chemical plant, such as dry powder fire extinguishers and diesel engine fire pumps. How to put a bottle of dry powder fire extinguisher in every place with potential safety hazards?
If there is a small fire, please use dry powder fire extinguisher to put out the fire immediately. However, when the fire is serious, a large diesel engine fire pump set should be used to put out the fire.
Under normal circumstances, once a fire breaks out, the power supply will be cut off and the electric pump cannot be used, so the fire pump driven by diesel engine can only be used to put out the fire. Guangzhou Sanye Technology Co., Ltd. diesel engine fire pump special complete set
Intelligent control function, once the fire signal is received, it will be started immediately, and it will be started within 10S and put into fire fighting work.
Because no one can accurately judge the leakage and the potential harm after the leakage, every leakage has caused great psychological panic. People can only escape from loopholes.
Looking back at the chlorine leakage accident in Chongqing Tianyuan Chemical General Factory, we can know why the leakage accidents of dangerous chemicals occur frequently.
The factory was established in 1940. In recent years, the factory has been losing money for years, and it is impossible to update the equipment, which leads to the continued overdue service of the equipment that should be scrapped. There have been many chlorine leakage accidents in liquid chlorine storage tanks before. For example, in the early morning of August 4, 2000, chlorine gas leaked from the factory and 36 people were poisoned. Over the years, the surrounding residents have often smelled strange smells.
Connecting with other leakage accidents, it can be seen that all chemical enterprises that have (or are prone to) leakage generally have the following characteristics: First, the enterprises are outdated, including outdated technology, outdated equipment and outdated technology. Second, the benefit is poor, because there is no money, like security? Soft? Investment can naturally be saved. Third, safety awareness is indifferent, even to the point of stinking.
The characteristics of high temperature, high pressure, strong corrosion and continuous production in the production of dangerous chemicals determine the danger of leakage all the time. A moment's slack will lead to leakage. In this dangerous environment, if the enterprise is in the above situation, then leakage is just like outflow from such enterprises? Venom? . Will keep flowing out? Venom? How can we expect it to create wealth for society?
remain
On June 5, 2004, an explosion occurred in Wuhan Dye Factory, Hubei Province. The explosion happened in a workshop that was abandoned for half a year and just rented out to a company. At that time, two workers of the company were cleaning up old equipment. The explosion point has sunk into a big pit.
At about 8: 50 pm on April 20, the residual liquid of a liquid chlorine storage tank in Jiangxi Petrochemical Plant, which had been shut down for many years, leaked, causing 282 people to be poisoned.
On the afternoon of August 1 day, about 1 point, a synthetic ammonia plant in Zhangzhou City, Fujian Province leaked residual ammonia, 3 1 person was poisoned, 1 person died, and more than 1,000 employees and residents around the warehouse were evacuated overnight.
?
Why do hazardous chemical residues often cause trouble? Take the accident of Jiangxi Petrochemical Plant as an example. After purchasing a bottle of liquid chlorine in August, 2000, the factory failed to register according to the requirements of safety management of hazardous chemicals, failed to report the management of liquid chlorine to the higher authorities, failed to evaluate the safety of liquid chlorine bottles, failed to establish a management system for the use of hazardous chemicals, and failed to formulate an emergency plan for hazardous chemicals. Finally, one day, I caught up with a few people who didn't know what chlorine was, and finally something happened. This shows that there must be a process for the residue to get into trouble. This process must be the negligence of enterprise managers and the ignorance of operators.
explosion
On April 2, 2004, an explosion occurred in the cephalosporin intermediate workshop of Zhejiang Haizheng Pharmaceutical Co., Ltd. (article from www.aqjj 120.com). Two employees died and nine employees were injured to varying degrees.
On June 1 1, an asphalt tank of Suining Yingkou Asphalt Oil Co., Ltd. suddenly exploded, killing 7 people.
On February 7, 65438, an explosion occurred in a chemical plant in Shitouzhuang, Huaiyin District, Jinan City, Shandong Province, causing 3 deaths and 2 injuries.
The explosion is the most thrilling. Careful analysis of these explosion accidents includes both comprehensive pharmaceutical groups with annual sales income of more than one billion yuan and private enterprises with small production scale. There are both furnace explosion and tank explosion; Both occur at night and during the day. This shows that flammable, explosive, toxic and harmful chemicals are used more and more widely, and the quantity is increasing, but enterprise management can't keep up. For example, the two explosion accidents of Zhejiang Haizheng Pharmaceutical Co., Ltd. and Liaoning Yingkou Asphalt Oil Co., Ltd. mentioned earlier were caused by local migrant workers. These migrant workers have not received strict training, and some have not received training at all. To some extent, the explosion is accompanied by the vigorous development of various chemical enterprises, which is the price paid by the development of the whole chemical industry. It's just that this price should be paid?
Hazardous chemicals leak, chemical equipment explosion, hazardous chemicals residue leak or even explosion. Once these chemical accidents happen, local government leaders will personally take command at the scene, and fire, public security, armed police and medical personnel will be mobilized urgently to evacuate the crowd, set up vigilance, put out the accidents and rescue the victims. Every chemical accident will cause people's panic, cause social and economic losses, and have a great impact.