Summary of the personal work of maintenance technicians, maintenance electrician technicians are often seen by us. Is an ordinary, socially valuable profession that can help us maintain something. Maintenance electrician work for a period of time, sometimes need to write a personal work summary. Let's share the work summary report of the maintenance electrician.
Personal Work Summary of Maintenance Technician 1 Time flies. I have been in the company for almost a year in a blink of an eye, and I feel a lot and gain a lot. Entering XX Electric Company and becoming an electrical engineer is a good development opportunity for me, and it is also a good opportunity to exercise and improve my various abilities. Here, first of all, I would like to thank the company leaders and colleagues for their strong support, care and help, so that I can quickly adapt to the company's management system and do my best to do my job well. Since I entered the company, I have carefully understood the general situation of the company's development, studied the company's rules and regulations, and become familiar with the company's technological process. At the same time, I really felt the positive and inspiring corporate culture, which benefited me a lot. I will summarize my work in the past year as follows:
First, work hard.
The installation group, primary cord group, primary copper bus group and secondary wire group in the workshop lasted for three months. We entered the box substation from the workshop, which can be said to be our first impression of the box substation company. I have to say that the workshop workers have set up a good image for me and benefited me a lot.
/kloc-entered the technical workshop for internship in October, and deeply felt the spirit of hard work and Excellence of colleagues. When I entered the technical room, I knew that my burden was heavy. I always remember this sentence: "If you want to give someone a bowl of water, you must have a bucket of water." . Because I know that it is not easy to be a qualified technician. As technicians, we should not only be able to handle the requirements put forward by customers, but more importantly, we should be able to solve the problems on the spot and understand the operation of the machinery and equipment on the spot.
Second, study hard and make continuous progress
At work, study hard, constantly improve yourself, and use other time to learn more advanced knowledge. From drawing the simplest manufacturing specifications to drawing a complete set of drawings, I have my own diligence and eagerness to learn, and it is impossible not to answer the questions of my colleagues in the office. I not only learned a lot from the old engineers, but also gave me a lot of insights. My colleagues not only carefully reviewed the drawings I designed for the first time, but also patiently explained them to me. I am very grateful to my colleagues for their help and have enough confidence to work better in the cultural atmosphere of our company.
Third, shortcomings and deficiencies.
Because of the short working hours and lack of skills and experience in many aspects, it is not easy to deal with many problems. In the future work, we should dare to solve and deal with problems, never escape when encountering problems, and learn from experienced technicians and old workers with an open mind; In addition, timely sort out experiences and lessons, record all doubts and unknowns, and take the time to solve them and make records, so that the same thing can be solved faster in the future. Seriously study the knowledge of changing boxes, so that I can better complete the work and tasks assigned by the leaders in the future work and mature myself faster.
Fourth, self-evaluation.
Although I have only participated in productive labor and technical study for one year, I have made great progress both ideologically and technically. It not only enriched my knowledge, but also improved my management and professional level. The most important thing is to lay a good foundation for me to complete the task better in my future work.
Summarizing the work of the past year, there are both achievements and shortcomings. In the future work, only by constantly summing up seriously, finding shortcomings and trying to correct them can we make faster progress, better serve the company and realize the value of life.
Summary of the work of two maintenance technicians As an electrician in the general affairs office of the school, I feel deeply responsible. I can't get the picture of the past year out of my mind. After careful consideration and summary, I have an objective and true evaluation of myself. In order to draw a satisfactory conclusion to this year's work, I will summarize this year's work as follows:
First, work attitude and ideological work.
I love my job, be strict in self-discipline, abide by all the rules and regulations of the school, strictly control myself, straighten my post, and always maintain a "modest, cautious and self-disciplined" working attitude. With the care and training of the leaders and the help of my colleagues, I always study hard, make positive progress, strive to improve myself, always work hard, finish my tasks seriously and perform my duties. Adhere to ideals and firm beliefs.
Second, the production work
1. Implement school management regulations, improve the level of water and electricity business, carefully use and maintain repair tools, regularly check whether the auxiliary facilities of water and electricity in the office are in good condition, and report to the leaders immediately when problems are found. Ensure that the circuit and waterway facilities are in good condition and ensure the smooth flow of water and electricity in the school.
2. Be strict with yourself, be lenient with others, and abide by the rules and regulations of the school. I strictly abide by the rules and regulations of the school, don't be late, don't leave early and take the initiative to ask for leave. At work, respect leaders and unite colleagues. Usually diligent and thrifty, work hard, treat people sincerely, and have harmonious interpersonal relationships. I never have an unprincipled argument. I always standardize my words and deeds according to the requirements of a famous Xiushui electrician, constantly cultivate my comprehensive quality, learn the relevant policies, regulations and punishment scales of hydropower, master the correct construction methods, and timely replace and transform the aging and potential safety hazards of hydropower facilities.
This year, we have mainly completed the following work:
1, I love my job, I am constantly familiar with updating my business in my daily work, and I can do everything seriously and responsibly.
2, do a good job in the maintenance of water and electricity lines, do regular inspection, timely maintenance, ensure the normal operation of power supply, water supply equipment, seriously complete the necessary improvement tasks, keep the line equipment in good condition, rational use of water and electricity materials, take good care of tools.
3, can do things seriously in the work, do not leave the post, love the post, do not mess around.
4, pay attention to safety according to the relevant operating procedures.
5, completes the inspection and maintenance, eliminate and solve problems in time.
6. Do a good job in the meter reading of school water and electricity, and even remind and correct the behavior of not using water and electricity according to regulations.
7. Be strict with yourself in daily work and abide by the rules and regulations of the unit.
9. Complete other tasks arranged by the leaders.
Looking back on the work in the past year, although I have achieved good results, there are still some shortcomings, but I will live up to the trust of the leaders. Facing the new year's work, I will start from scratch and work hard as always to be an excellent electrician.
Personal Work Summary of Maintenance Technician 3 Time flies like water. In a blink of an eye, I have worked in the company for more than two years. Before that, the shipbuilding industry was like a blank sheet of paper to me, because I had never understood it, let alone touched it.
At school, my major is electrical operation and control. After graduation, I was assigned to Baosteel to do logistics work for one year. X0 years by chance, I was lucky enough to come to X Changxing Shipbuilding Co., Ltd. After entering the company, I was assigned to the module department. Because I got the intermediate certificate of electrician in school, I chose the job of ship electrician. From then on, I became an electrician in the superstructure. I've only seen big ships on TV before. Unexpectedly, I can not only see them now, but also become a shipyard myself.
Just arrived at the factory, because we are all new employees, so we received military training for nearly a month. We don't know much about shipbuilding, and some people can say that they don't know what shipbuilding is. So the department arranged a teacher training for us to teach us. From how to connect a simple fluorescent lamp to how to connect various devices. Teach us how to learn to read drawings, and also teach us the requirements and techniques of construction. In short, it is for our future work.
As the company slowly entered the formal stage, the department set up two electrician groups for us. I was assigned to electrician group 2. There are three old masters in our group who have worked in the old factory for several years. Both work experience and technology are of great help to me. Under their leadership, our group began to build the first ship. From the beginning of making the structure, I just learned by doing. I immediately asked Lao shifu if he didn't understand. Unexpectedly, with the concerted efforts of our team member Qi Xin, the construction task was successfully completed and was praised by the department. This makes me feel sweet psychologically, as if I felt the joy of success. But before long, I faced a major challenge, that is, cable laying. I haven't done it before, let alone such a big workload. Looking at those dozens of barrels of cables and so many confused systems, I began to panic and didn't know what to do. But the master told me not to worry, as long as I study hard and have strong hands-on ability, there is nothing I can't do. Then I was put in charge of the deck of the ship by the team leader. It was the first time I faced such a difficult task, and I didn't have the confidence to finish it. Because this floor also covers a lot of electrical equipment in the kitchen. At the beginning, you will encounter all kinds of problems and difficulties, whether it is drawings or which system. Because this is my first time to do it. However, due to the careful guidance of the teacher and the help of my colleagues, I successfully completed the task.
It didn't take long for our team to complete all the construction tasks and successfully passed the self-inspection, ship inspection, shipowner inspection and acceptance. We didn't affect the progress of the project until the installation and wiring of the equipment and the final debugging stage. Looking at all the fluorescent lights, all the minutes show the time normally, all the speakers hear wonderful music, and the telephones of all departments keep normal calls. The washing machine can also wash clothes, the kitchen equipment can also cook and eat, and all systems can operate normally. By this time, our work has basically ended. Seeing this, I think of every drop of sweat we shed at that time and every minute of extra work. I feel extremely proud and nostalgic, and I have a sense of success. Because those successes have the contribution of each of us, even a trivial little screw.
Time is running out, work experience is increasing day by day, and professional skills have been significantly improved. So with the help of the master and the arrangement of the leader, I once again accepted a new challenge, that is, the cab. Because the cab is the core part of the superstructure, every system should start from here, and important equipment and systems such as bridge console, radar and radio station are concentrated here. So it is more difficult to do, but it is also the job that can learn the most technology. So I concentrate. Learn by doing. I don't know. Ask the master right away. The drawings of each system should also be read carefully. In this way, with the help of the master, my first taxi was successfully completed. Moreover, I was lucky enough to go on a sea trial, which was also my first voyage, and it was on such a big ship. I used to hear people talk about the trial, and I always wondered when I could go, but I didn't expect it to happen so soon.
After building a few ships, I feel that I really have mastered a lot of things. I know how many systems there are on board, the function of each system, what the radio system does, what the navigation system includes, and the operation of the air conditioning and refrigeration system.
Now I can basically complete the task assigned by the team leader independently. You can also debug laundry equipment, kitchen equipment and other systems yourself. In the face of one drawing after another, I am no longer strange, and I am no longer worried about not understanding it. When I encounter one system after another, I am no longer afraid that I can't finish it.