Car models of professional electromagnetic groups are allowed to be made by themselves or produced by car model suppliers. If you have strong hands-on ability, you can choose a car model with better self-made performance. In view of the current thinking of four-wheel electromagnetic production, it is suggested that novices and even old drivers directly use the C-car model.
After years of inspection, the performance and quality of C car model are obvious to all. Basically, it is not difficult to get 2.7m/s on a new car. If you want to reach 3m/s, you need to deal with the tires. In the past, there were many car models with C, and the camera tracked to 3.5m/s, which shows that the performance of C car model is completely sufficient.
Making car window film
Tracking adopts electromagnetic induction module, which mainly induces magnetic field signals through the resonance of inductance and capacitance. The newly introduced electromagnetic induction module of flying transmission technology has better performance than before. The customized 10.5mh inductor and 6.2nf patch capacitor can better induce 20khz magnetic field signals. Because the capacitor will be lighter if it is replaced by a patch.
The scheme of demonstrating the car model can be adopted, that is, the front 10cm is higher than the obstacle, and then the TOF module is extended forward a little, which is enough for the car to avoid the obstacle. Even if the pole in front rubs against an obstacle, it won't stop the car. Because the pole is inclined, the car will slide past and continue to drive forward because of inertia.