Clean the shell of the sampler with a wet sponge and mild detergent, including the four sides of the sampler. The cooling system of the sampler dissipates heat through the shell of the sampler. Do not use any abrasive cleaner.
2 Clean the sample storage room
Clean the inside and outside of the sample room with wet sponge and neutral detergent. Do not use any abrasive cleaner.
3 clean the sample bottle
Wash the sample bottle with a brush and mild washing liquid, then rinse with clear water and then with distilled water.
4 clean the water inlet pipe and pump pipe.
Use mild washing liquid or other cleaning liquid to pump through the pipeline to achieve the purpose of cleaning. You can use the manual mode of the sampler.
5 No lubrication is required.
The sampling pump does not need daily lubrication and maintenance. Please do not use grease, silicone grease, engine oil or other lubricants to try to lubricate the pump, because these will greatly reduce the life of the pump pipe and rotor assembly.
Note: Before any maintenance or maintenance operation, the power supply must be cut off!