1, it is necessary to confirm whether the positive and negative wiring of the motor is correct. In general, the positive pole of the motor is connected to the positive pole of the power supply, and the negative pole is connected to the negative pole of the power supply. In the process of forward and reverse rotation, only two wires of the motor need to be exchanged.
2. A controller or switch is needed to control the forward and reverse rotation of the motor. If the controller is used, it is necessary to set the forward and reverse switch of the controller to the corresponding position to realize the forward and reverse rotation of the motor. If a switch is used, it is necessary to connect the two wires of the switch to the two wires of the motor respectively, and then realize the positive and negative rotation of the motor by controlling the switch state of the switch.
3, need to adjust the speed of the motor according to actual needs. The speed regulation of motor can be realized by adjusting the voltage of motor or using frequency converter. When adjusting the motor speed, be careful not to exceed the rated speed of the motor to avoid damaging the motor.