Handan riveter training is good for you to learn real skills!

Handan riveter training which good small series introduces Venus School to everyone, and their teaching philosophy is to let you learn the real skills! They not only adopt the teaching method of combining theory with practice, but also focus on students' practical operation, supplemented by teachers' guidance. Let every student find a good job after graduation. Bian Xiao asked the attention of riveting workers from Handan Riveting Training School-Jinxing: 1. Before work, tools and equipment must be checked and kept in good condition, such as hammers, punches and other hammering tools, with no burrs and scars on the top, no cracks on the hammer handle, firm installation and iron wedges on the hammer. Quenching is strictly prohibited at the top of various hammering tools. 2. When using a sledgehammer, pay attention to the scope of the hammer. Think twice when you hammer. No one is allowed to stand opposite. Do not wear gloves when hammering. 3. Wear protective glasses when shoveling, splitting and riveting, and don't operate on people. When using an air shovel, you must abide by the "Technical Specification for Safety of Air Shovel". 4. Use of riveter and locksmith equipment and common tools of locksmith such as grinder, pneumatic tools, portable electric and portable pneumatic tools, hammers, flat shovels, etc. Should be implemented in accordance with various safety technical regulations. 5. When using a crane to lift components, you must abide by the Technical Regulations for Safety of Overhead Crane. Check whether the spreader is safe and reliable. No one is allowed to walk or stay under the sling. Command correctly and cooperate carefully. 6. When working on the heating furnace, stay away from wires or flammable items. After work, the thermal power plant must be put out, and after the flameout, it must be inspected in detail to avoid re-ignition. 7. The heated materials should be stored in a fixed place. When it is necessary to move, measures should be taken to prevent burns. 8. When assembling riveted and welded parts, it is forbidden to touch the corresponding part of the object by hand to prevent the hand from being punctured and squeezed. When using wedge and crowbar, the fulcrum should be firm, and no one is allowed on the opposite side to prevent slipping. According to Bian Xiao, Venus is a favorable school for riveting training in Handan, and its teaching quality is first-class. So I won high praise from many students!