A full working life, inadvertently passed. During this period, I made a lot of achievements in my work. It's time to sum up your past achievements in the work summary. So how do you sum up your works and write new tricks? The following is my personal work summary (5 selected articles) about factory technicians for your reference, hoping to help friends in need.
Personal Work Summary of Factory Technician 1 I have been working in xx District for X years, and it has been more than one year. During this year, I have been working in the project department, responsible for on-site management and technical guidance of electrical construction. Under my own efforts and leadership, I was promoted from an ordinary electrical supervisor to a part-time technician in the electrical instrument workshop.
During this period, I was responsible for the electrical construction supervision of the workshop belonging to xx Factory, and at the same time, I was responsible for the electrical instrument workshop technician.
Although the workload is much heavier than before, it provides me with an opportunity to fully understand the whole electrical system of the factory, strengthens my understanding and mastery of the electrical system of the factory, improves my ability to independently analyze and deal with problems when various accidents occur in some systems, and lays a good foundation for my further electrical technical work. Next, I will summarize my work as a workshop technician.
First, my understanding and attitude towards the work of electrical instrument technicians
After I was appointed as an electrical instrument workshop technician, I began to gradually enter this role. Although I used to be an electrical equipment clerk in xx Co., Ltd., I have a deep understanding and mastery of high and low voltage electrical technology and equipment. However, since I came to the new construction site, I feel that in the process of electrical supervision, the pressure to be a qualified electrical instrument technician is increasing.
There are several reasons:
First, the number of electrical equipment in the factory is huge;
Second, there are many kinds of electrical equipment, involving high and low voltage transmission, distribution, transmission and electrical maintenance;
Third, the mixing of old and new equipment increases the probability of electrical equipment failure and the difficulty of troubleshooting;
Fourthly, a new 1 10kva substation has been built, which is something I have never been exposed to;
Fifth, I haven't been engaged in instrument work for three or four years, and I must relearn the knowledge I missed before.
Faced with this pressure, I feel a great responsibility. Providing technical support for the normal and stable operation of electrical equipment in the factory and handling sudden failures have become my focus.
I believe I have the ability to do this job well. The greater the pressure, the greater the motivation. At the beginning of working as an electrical instrument technician, I was familiar with and understood the electrical equipment of xx fermentation workshop, xxx refining workshop, power workshop, water making station, xxx substation and xxx switch station that I was not familiar with before. And collect the operating instructions of electrical equipment that has not been touched before, and be familiar with its working principle, parameter setting, maintenance and troubleshooting methods. Discuss with the manufacturer and relevant personnel the issues that have objections, so as to ensure the thoroughness of mastering relevant equipment.
In addition, I communicate with the maintenance group, operation group and instrument group of the workshop to understand the knowledge level of existing employees and the technical problems that need to be solved in the current work.
Second, this year's work content
(1) Daily work content
(1) When the material is full, the workshop centrifuge cannot be started. I went to check and found that the centrifuge was too heavy to start. The output power of frequency converter can't overcome this torque, and the centrifuge can't start. After understanding the working reason, I reset the starting torque of the inverter and put in DC braking resistor, which extended the starting time and ensured the normal use of the centrifuge.
(2) 1 When the frequency converter of the induced draft fan in the workshop stops normally, it always reports "Stop and Overcurrent". After my analysis, I found that when parking, the operator stopped too fast and stopped too fast, and did not gradually reduce the frequency. In order to solve this problem completely, I installed a DC reactor for the inverter and set the parameters of the DC reactor, which solved this problem from the technical level. In addition, in order to ensure the normal operation of the equipment, I also explained the normal startup procedures and precautions of the equipment to the operators in xx workshop.
(3) The pressure of the thin film evaporator in the workshop is always at a high level, which cannot guarantee the normal operation of production. After consultation with Bai Yang, I suggest adopting frequency conversion control mode. Manually control the equipment pressure to ensure the stability of production. Finally, we installed frequency converters for 8 thin-film evaporators, and after a period of operation, it was determined that the effect reached the expected requirements.
(4) When the reverse osmosis high-pressure pump in the third workshop was put into trial operation, the frequency converter could not work normally. After checking, I found that the parameters of the inverter were artificially changed, which led to the conflict of the operating parameters of the inverter. In order to solve this problem, I reset the parameters to ensure the formal use of the equipment.
(5) During the operation of the centrifuge in the dewatering room of the sewage station, a current fault was reported. After on-site inspection, I confirmed that there was something wrong with the motor of the inverter. After further inspection of the motor, it was found that the motor was short-circuited between turns. After the motor was repaired, the equipment returned to normal.
(6) The main hot water solenoid valve and circuit board in the workshop are often broken. I think the working power supply is polluted by DC appliances such as frequency converter, which leads to voltage superposition and high voltage, which leads to breakdown of the working circuit board. Therefore, I suggest that the workshop install a voltage regulator to supply power to the instrument and equipment alone, so as to ensure the safe use and stable operation of the instrument and equipment.
These are just a small part of my daily work. Such sudden accidents often happen. When I need to deal with them, I am always the first to come to the scene, and try my best to troubleshoot the workshop as soon as possible and restore the normal operation of the equipment.
(2) Technical transformation
(1) In July, the main circuit of xx frequency conversion control cabinet was technically reformed, from 4 transformer load circuit to1transformer load circuit. Reduce the load of four transformers. Before the transformation, the maximum load of the transformer can reach above xxx, which is more than 15% higher than the rated current of the transformer, which seriously threatens the safe operation of the transformer and leaves great hidden dangers for the normal production of the workshop.
In this regard, under the unified leadership of the workshop, we put forward a plan and carried out the above transformation after feasibility demonstration. Through transformation, the load of No.4 transformer can be kept below xxx in high production stage, which ensures the safety of equipment and achieves the expected effect of transformation.
(2) In August, xx Workshop 1-4 electric control loop of boiler drum and induced draft fan was carried out.
Chain transformation. The 1-4 furnace in xx workshop is the old equipment removed by Dayao. The old drum induced draft fan has no electrical control chain. In production, when the induced draft fan stops due to an accident and the blower continues to run, it may cause xx tempering, which may lead to injuries to equipment and personnel. In this regard, in the absence of drawings, I measured the electrical circuit of the drum and induced draft fan motor control frequency conversion cabinet in xx workshop, and finally found the way of chain control. With the cooperation of the electrical maintenance team, I completed the transformation and achieved the goal of transformation.
(3) In June+10, 5438, the interlock control mode of reverse osmosis electrical instruments in xxx workshop was reformed. In the past, the system only provided high-pressure and high-temperature quick break protection, but did not provide low-pressure shutdown protection, which easily caused the high-pressure pump to burn out. However, in the process of restoring low-voltage protection, there was a fault that the low-voltage cleaning pump could not start the car. After communicating with the workshop, it was found that the original manufacturer's drawing design was defective. After I changed the drawings and connected the chain lines in a new way, the equipment returned to normal.
(4) During the project construction, due to the connection between the design and the old and new equipment, some workshops did not install meters. I installed meters for this part of the circuit under the arrangement of the workshop. The specific installation location is xx Jingdong on the first floor and East on the third floor; The southern dining hall sends electricity to the street lamps on the 30-meter road; Two refrigeration power supply circuits in the finished product warehouse in area X, etc.
(iii) Staff training
Training employees has always been one of the main tasks of the workshop. The technical level of employees is related to the efficiency of workshop maintenance equipment. I have also done a lot of work in this regard.
First of all, I sorted out three basic teaching plans: electrician basic training materials, common faults and troubleshooting of frequency converters, and troubleshooting of soft start.
Secondly, in June, August, September, 1 1 month, I trained all electrical maintenance personnel, instrument maintenance personnel and electrical operators in the electrical instrument workshop. The main contents of the training include basic electrical knowledge, parameter setting of frequency converter, common faults and troubleshooting methods of soft start, principle and usage of DC bridge, etc. In September, all electrical maintenance personnel, instrument maintenance personnel and electrical operators were assessed, and the qualified rate reached over 97%, which reached the expected goal of training.
Third, the shortcomings in the work and the next work goal
In this year's work, I have made some achievements through my own efforts. But I feel there is still a big gap from the standard of an excellent technician. This is mainly manifested in:
① In sudden accidents, I am not particularly familiar with the performance of some new equipment, and I still need to find information, which affects the timeliness of equipment troubleshooting;
(2) The establishment of equipment files was not carried out, mainly because the completion data was not perfect, and taking charge of the project took up a lot of my energy. In this work, I feel a little overwhelmed;
③ Training work is not included in the standardized system. Although training has been carried out now, it is easy to reduce the effect of normal training due to lack of coordination.
④ The standardized management of team equipment is not in place, which leads to no further improvement of team work efficiency.
In view of these shortcomings, I intend to continue to strengthen my study, thoroughly understand the new equipment as soon as possible, and impart these new knowledge to employees as soon as possible, so as to improve the accuracy and efficiency of troubleshooting the overall electrical equipment in the factory.
Improve the establishment of electrical equipment files in the whole plant as soon as possible, synchronize paper documents with electronic documents, and improve the management level of electrical equipment in the whole plant. Coordinate the relationship with other technicians, formulate unified training objectives, incorporate training into employees' performance work, establish an interactive platform between employees and technicians, and strive to build the workshop into a dynamic group of "helping, learning, competing and catching up".
In addition, gradually standardize the team's equipment management, formulate a standard template for each job, so that each job can be followed, and improve the team's work efficiency on the basis of standardization.
Summary of personal work of factory technicians 2 Time flies and years are like songs! In a blink of an eye, I have been working for more than a year. Looking back on my work in the past year and summing up the experience and lessons in my work will help me to develop my strengths and avoid weaknesses in my future work and do my work better. I have been working as a civil engineer in xx Project Department. Through the practice and study of this project, with the care and training of the leaders of the project department and the enthusiastic help of my colleagues, my work has made rapid progress and I am striding forward to become a qualified civil engineering teacher. Thank you for your trust in me and the support of my colleagues. Through the joint efforts of the team, I summed up some work experience, and here I make a personal summary of my work in the past year:
First, the working ideas
In this year's practical work, I have changed a lot from an armchair strategist at school to my actual thinking now. The construction site is our main battlefield, and whether the project is done well or not is realized at the construction site. This project is a long process. Only by investing a lot of manpower and material resources and organizing the construction reasonably can the construction progress be guaranteed. The concept of "safety first, alarm bells ringing" is carried out in my whole work!
Second, the job responsibilities
Carry out various technical work under the leadership of the competent engineer. Be responsible for the preliminary examination of the construction organization design submitted by the construction unit, cooperate with the supervisor in the construction process, and be fully responsible for the construction inspection and acceptance of related projects until the completion acceptance is qualified and delivered for use. Master and be familiar with construction drawings, construction specifications and quality inspection acceptance evaluation standards, and be responsible for the inspection and supervision of civilized construction such as project progress, safety and fire control. Timely on-site supervision found that the construction did not follow the drawings and specifications. If the on-site rectification fails, cooperate with the supervisor to issue a shutdown rectification form and report it to the chief engineer. Supervise the on-site safety guarantee facilities, measures and the safety status of personnel, machinery and equipment during construction, and put forward rectification opinions in time.
Third, specific work.
Several other technicians and I are mainly responsible for on-site engineering technical management, and arrange technical work such as setting out, template inspection and steel bar inspection according to the progress of the project! As a technician, we should master the engineering drawings skillfully, make technical disclosure before the construction of each type of work, and monitor irregularly in some error-prone places besides disclosure! Personal hope is "front, middle and back". Before this work is carried out, it is necessary to remind the team leader of the key points of work in advance, supervise many times when large-scale construction is carried out, and then conduct acceptance after the construction is basically completed! We must strictly control the quality so as not to miss any problems!
Four. Experience and lessons
In this year's work, in addition to the construction log, I have been taking work notes, summarizing my daily work and recording some experiences and experiences as a reference for future work! I bought a lot of atlases myself. I usually read more atlases, so I can read more, ask more and listen more! Work hard and be responsible for your duties! I also made many mistakes in my work. Sometimes the work is distracted, and the elevation and size are out of harmony. Fortunately, we found and corrected it in time, which did not lead to an irreversible situation! I grew up in the face of repeated experiences and lessons. I know the weight of this burden and how important it is to develop good work habits! I also gradually summed up my own working methods, which improved work efficiency and reduced the chance of making mistakes! With the help of leaders and colleagues, the technology is constantly improving!
Generally speaking, all the tasks assigned by the leaders have been successfully completed. I have been engaged in engineering construction for one year and have made continuous progress. My professional knowledge has been improved and deepened, and my working ability, including organizational cooperation ability, management ability and adaptability, has been greatly improved. More importantly, I have gained valuable work experience. The work performance in the past year has also been recognized by the leaders and colleagues of the project department. Looking forward to the future, there will be more new challenges in my work. I will definitely try my best to work more actively. In the future work, I will meet new challenges with a hundred times enthusiasm, progress and mature in my study, and contribute to the development of the factory!
Summary of personal work of factory technicians From 3 to xx years, I have been engaged in construction management work in the technical transformation project of tapping ethylene potential in xx ethylene plant, tapping polyethylene potential in xx ethylene plant, catalytic cracking technical transformation project in xx refinery and capacity expansion project in No.1 Distillation Plant of Dalian Petrochemical Company. In these constructions, I strengthened quality management.
In terms of quality management, I take strengthening the management of lifelong responsibility system for quality, clarifying responsibilities and strengthening management responsibility cards as the key points in the construction process, so as to ensure the quality of each construction process is qualified, and at the same time increase the daily management of quality, so that the construction of the next working procedure cannot be carried out if this working procedure is unqualified, and ensure that each working procedure is controlled. At the same time, the technical disclosure, scheme preparation and implementation supervision before construction are strengthened. Strict implementation of various standards in construction, strengthening process quality control, implementing quality wage system, and high quality and good price have promoted the creation of excellent projects.
In the aspect of cost management, cost prediction should be made before construction, and dynamic monitoring management should be implemented during construction, so that the project cost will always run under an orderly and controllable management system. In actual construction, it is forbidden to rework in a large area on site, use materials reasonably, use old waste and minimize project investment. At the same time, strengthen the management of machines and tools, check them regularly, do a good job of maintenance, improve the comprehensive utilization rate and ensure long-term operation. In terms of strengthening safety management, according to the characteristics of long construction time, responsible on-site construction environment and frequent interchange operations, we will strengthen safety management on the construction site, strengthen employees' awareness of self-protection, insist on giving priority to safety work, strengthen safety and fire prevention education for all employees, and establish a system that everyone is responsible for safety and fire prevention, so as to ensure safety, implementation and inspection every day.
In many years of on-site construction, I have been giving full play to my strengths and working actively with a positive attitude. In xx, the rationalization proposal was put forward in the first distillation capacity expansion project of Dalian Petrochemical Company, which saved 200,000 yuan for the project, not only reduced the construction difficulty, but also improved the construction efficiency. In the case of tight construction period, heavy tasks and hard working conditions, the reasonable division of construction stages ensured the construction quality and created good conditions for early completion, which won high praise from many leaders such as Party A and the supervisor.
The above is the main work I have done since I joined the work, but I have also engaged in or participated in many other jobs, such as participating in the bidding work of the project many times, the budget and settlement management of the project, etc. In all my work, I can do my duty, think positively, keep learning new knowledge, consider the project construction comprehensively and finally, and successfully complete all the tasks assigned by the leaders. Over the years, he has been rated as one of the top ten young people and outstanding employees by the company, writing papers, rationalizing suggestions and construction technical schemes, and has been rated as excellent works for many times.
I have been engaged in the management of technical quality department for xx years, and this position is a new starting point for me. Technical management post is the overall technical quality management of each construction project to ensure the effective operation of the quality system. Including the following work: organizing the implementation of national, regional and departmental regulations, standards and documents on technical quality; Responsible for the technical quality management of the project; Learn from the advanced construction methods in the same industry or create unique construction methods to promote and implement in this enterprise, constantly improve the construction methods and improve the management level;
Do a good job in technical training according to the present situation and long-term development plan of enterprises. Therefore, regarding the work of this department, I have done the following work:
Kanban management has been implemented in technical management. Implementing kanban management is an important measure of our company's operation and management. Through the implementation of Kanban management, the distribution level has been widened, which fully embodies the principle of distribution according to work, such as more work and more income, less work and less income, and improves efficiency. In the process of implementation, according to the relevant implementation plan and regulations of Kanban management, the task book will be distributed to the team and operation group according to the general process. The task book defines the construction requirements, the construction procedures for picking and using materials, and the piecework days. The project department will verify the piecework salary according to the completion of the task book of the operation team. During this period, the personnel of the supply department, the technical management department and other relevant offices should cooperate with each other and work together to ensure that all projects are completed on time, with high quality and safety.
Personal Work Summary of Factory Technician 4 As a technician in the power supply workshop of the factory, based on his post, he pays attention to mastering his own power supply system business, improving his technical level, actively participating in various trainings, constantly expanding his knowledge, applying advanced technology and combining his own professional knowledge, and applying power supply technology to coal mine safety production. The following is a summary of my work.
First, actively learn technology and strive to improve their professional level.
Under the leadership of relevant departments, visit and study in xx factory with the team, master the new technology and new process of new equipment, and actively discuss and communicate with peers. Subsequently, the relevant technicians of this factory and xx were invited to our mine to provide training on the application and maintenance of electrical equipment for power supply workers, and gave technical guidance to the relevant technicians of our factory on the spot, which solved many technical problems. I recorded the problems I encountered in my usual work and asked the old masters in the power supply workshop until I understood them. Whenever the relevant technicians of the factory come to the mine to solve the major equipment failure, I actively seek their advice. Through continuous study and practice, I gradually became familiar with the application of underground power supply system and high and low voltage equipment, and improved my professional level.
Second, reasonably design the power supply system and scientifically formulate technical measures.
Under the guidance of the section chief in charge of power supply, I gradually designed the power supply system of each coal mining face. Because I am not familiar with the working face and its mechanical equipment, in order to arrange the route of high and low voltage cables reasonably, I often go to the scene, measure the distance, set up calculations scientifically, and choose electrical equipment and cable models reasonably, which not only meets the actual needs, but also saves a lot of manpower and material resources.
Third, the task of safety and quality standardization has been fruitful.
In order to implement the quality standardization work issued by the mine, according to the situation that the power supply team arranges and hangs cables in the main tunnels and substations underground according to the standardization requirements, this paper puts forward reasonable suggestions and formulates scientific technical measures for safe construction.
Four, do a good job, improve the skill level of workers.
In daily work, according to the changes of the upper and lower high and low voltage power supply systems, the power supply system diagram is revised in time, so as to know the load of each substation at any time and be responsible for the maintenance of the underground remote monitoring system. At the same time, I recalculated the setting parameters of the high-voltage relay protection device in the mine and counted the high-voltage and low-voltage cables in the mine. Under the guidance of system leaders, we organize electricians to carry out skills training from time to time, learn new technologies, improve theoretical and cultural level and operational skills, and often organize various skills competitions to actively carry out activities such as "xx Group" and "Finger Dictation Operation". Through these training activities, the professional level of workshop electricians and their ability to deal with switch faults have been continuously improved, which has greatly shortened the time to deal with accidents and effectively guaranteed the safe power supply of the whole mine.
Summary of personal work of factory technicians 5 In a blink of an eye, 20xx years will soon pass. Looking back on my work this year, I learned some new knowledge and found some shortcomings. The main work is summarized as follows:
First, labor discipline, ideological style
I can abide by the rules and regulations of xx, get to work on time, and leave early without being late. Strictly follow the operating rules, do not do anything unrelated to work in the class, unite with colleagues, care for each other, conscientiously implement the spirit and requirements of the relevant documents of superiors, and consciously safeguard the corporate image.
Second, safety in production
1, security:
Before going to work, you can consciously wear labor protection articles, seriously participate in various safety trainings, and take notes. Firmly establish the idea of "safety first, prevention first", earnestly implement it to every team member, and truly achieve safe production. Therefore, the group's various safety accidents are guaranteed to be "zero". From June 5438+0 to June 5438+00, this team involved dozens of dangerous first-class hot work, such as welding full-flow tanks, repairing reflux pipes of centrifuges and crystallization tanks, and repairing mother liquor storage tanks. Before each overhaul, you can make preparations for safety overhaul, such as cleaning the tank, preparing fire-fighting equipment and overhauling the construction unit.
2. Production:
With the guidance of leaders at all levels and the cooperation of team members, the output of ammonium sulfate can be exceeded every month, and the consumption of sulfuric acid is better every month, which is also inseparable from the work performance of employees. In the ammonium sulfate production competition, with the joint efforts of the team, the team has achieved good results many times.
3, production quality:
The qualified rate of ammonium sulfate product quality is 100%, and the group should be able to carry out the work in the following aspects.
(1) Acidity of mother liquor During normal production and discharging, the acidity of each shift is carefully controlled to ensure that the acidity is between 3% and 5%, so that ammonium sulfate crystals can grow continuously and evenly.
(2) The reasonable mother liquor temperature should be controlled at about 50℃ and adjusted in time according to different climates to ensure the rapid and continuous formation and growth of ammonium sulfate particles.
(3) Strengthen the operation of centrifuges, continuously and uniformly discharge materials, and ensure that free acid and water are qualified.
(4) Strengthen the control of bed temperature and the cleaning of bed surface and bed eye, and thoroughly clean once a week to ensure the qualified water content of finished ammonium sulfate.
Third, training.
I can consciously attend various trainings on time, take notes in class, and pass the exam at one time. In addition, the training of new workers should start with safety knowledge, and they should be exposed to safety source identification and safety operation procedures in their usual practice, and only after they are really familiar with them can they operate independently. In the process of operation, tell them seriously and patiently about some equipment failures and accidents that are easy to happen in this position, and how to deal with similar accidents, so that they can be confident and not chaotic.
Four. Shortcomings and future plans
1. After one year's work, I found that there are still some shortcomings. If the team management level is still lacking, sometimes the key points can't be grasped in the work, especially when the post personnel are lacking, they can't care about the operation of the post personnel well, and think all the work well and do it carefully. In addition, the technical level of business needs to be strengthened.
2, the next step is to strengthen their technical business study, do not know how to ask more questions, unite colleagues, conscientiously implement and complete the tasks assigned by leaders at all levels, so that they and their team can make new progress.
;