How are the full-width mine-sweeping plow and bulldozer blades of American COV wrecker constructed?

The American COV wrecker was developed by israel military industries Company. Two shovels are connected by hinges, and the two parts can be rotated into a V-shaped mine-sweeping plow or a linear bulldozer. When used as a mine-sweeping plow, it is V-shaped, with the lower plow teeth arranged at the best interval, and the plow wall is concave, extending with detachable "wings", which can clean the channel with a width of1.5m.

If the extension is removed and the plow teeth are covered with a cover, the V-knife can cut a path through the ruins of the battlefield and the rubble of the city. The mine-sweeping plough can make the soil buried with mines roll smoothly and push the mines out of the width of the car body. After passing through the plow wall, the mines continue to roll outward to ensure that they will not roll back to the cleaned path.

In order to convert the mine-sweeping plow into a bulldozer blade, it is necessary to remove the "wings", reduce the width of the blade to 4. 1m, make the plow wall rotate around the connecting hinge pin in the middle of the V-shaped plow, and then cover the plow teeth with a cover.