Anitec recorder setting key, Anitec n8 description and chart.

The setting keys of Anitec recorder are similar to other recorders, including on key, down key, recording key/confirm key, mode key, menu key, lens, TF card slot, USB interface and vehicle charging socket. To set the Anitec video recorder, first press the Video key/Enter key to pause the ongoing video recording, and then press it again to enter the setting interface.

Anitec n8 user manual

Main parameters of Anitec n8

Product type: rearview mirror driving recorder

Evaluation screen resolution: 480X272

Screen size: 4.3 inches

Lens pixel: 8 million

Settable parameters

1, resolution: there are many resolutions to choose from, with the highest resolution of 720p;

2. Cycle video recording: Off, 1 minute, 2 minutes, 3 minutes and other options refer to the duration of each video recording when the driving recorder cycles video recording. The video recorder is saved as a segment, and when the memory card is full, it will automatically overwrite the video with the previous time;

3. Motion detection: If turned on, when an object moves within the camera range, it will automatically start recording when the recorder is in standby state.

4. Video Audio: On/off, which determines whether to record during video recording;

5. Date label: If it is turned on, the date and time will be displayed on the screen;

6. Gravity sensing: off, high, medium and low, and the sensitivity of induced collision will automatically start recording after collision or severe vibration;

7. Date and time: the date and time figures can be adjusted;

8, key tone: can be turned off;

9. Language setting: Simplified Chinese, Traditional Chinese, English and other languages are provided, and Simplified Chinese is the default;

10, light source frequency: 50Hz in China, 60Hz in foreign countries or Taiwan Province Province;

1 1, screensaver: off, 3 minutes, 5 minutes, 10 minutes optional;

12. Default setting: factory setting is restored.