Brief introduction: Hebei Beikuang Mining Machinery Manufacturing Co., Ltd. is a high-tech enterprise that produces rubber spare parts for mining equipment. After ten years of hard work, it has become a powerful innovative company integrating R&D, production and sales. The company is located in Longhua Development Zone, Jingxian County, Hengshui City, Hebei Province, covering an area of over 70 mu, with a fixed investment of 40 million yuan and a total investment of 60 million yuan. The company now has two rubber vulcanization workshops, a casting workshop, a machine tool processing workshop and a number of advanced testing equipment. The structure of BF flotation machine is shown in the figure, which is mainly composed of impeller, cover plate, spindle, central cylinder and tank. The whole impeller structure is installed on the main beam of the tank body and driven by a motor through a V-belt. The structural feature of the machine is that the impeller is composed of closed double truncated cones, which can produce strong downward circulation of pulp. The machine can also be equipped with automatic pulp control device to adjust the liquid level. BF flotation machine is suitable for separating ferrous metals and nonmetals such as coal fluorite and talc, and is more widely used for separating nonferrous metals such as gold, silver, copper, iron, tungsten, lead, zinc, tin, molybdenum, nickel, tantalum, niobium, manganese ore and coal. It can also be used for rough machining and cleaning of ferrous metals and nonmetals. When the impeller of KYF aeration mechanical stirring flotation machine rotates, the pulp in the tank is sucked into the impeller blades from the lower end through the bottom of the tank. At the same time, the low-pressure air sent by the blower enters the air distributor in the impeller cavity through the air duct, the air regulating valve and the hollow shaft, and enters the impeller blades through the small holes around the distributor. After the pulp and air are fully mixed between the impeller blades, they are discharged from the periphery of the upper half of the impeller, and the discharged ore flows obliquely upwards, which is stabilized and stabilized by the stator installed obliquely above the impeller. Mineralized bubbles rise to the surface of the tank to form foam, which flows into the foam tank by itself. The pulp returns to the impeller area for recycling, and the other part enters the lower tank through the circulating holes in the tank partition wall for re-separation. When the impeller of SF flotation machine rotates, the pulp in the upper and lower impeller cavities is thrown around by centrifugal force under the action of the upper and lower blades, so that a negative pressure zone is formed in the upper and lower impeller cavities. At the same time, the pulp on the upper part of the cover plate is sucked into the upper impeller cavity through the circulation hole on the cover plate, forming the upward circulation of the pulp. When the lower blade throws the pulp around, the pulp at its lower part is replenished to the center, thus forming the downward circulation of the pulp. Air is sucked into the upper impeller cavity through the suction pipe and the central cylinder, and mixed with the sucked pulp to form a large number of fine bubbles, which are evenly dispersed in the tank after flowing stably through the cover plate to form mineralized bubbles. Mineralized bubbles float to the foam layer and are scraped out by a scraper to obtain foam products. The structure of XCF inflatable flotation machine for SF flotation machine is as shown in the figure, which consists of a tank filled with pulp, a large interval impeller with upper and lower blades, a seated stator with radial blades, a split disc cover plate, a split central cylinder, a connecting pipe with an exhaust hole, a bearing body, a hollow spindle and an air regulating valve. The deep groove body has two structures: open and closed. The bearing body has a seat type and a side hanging type, and is installed on the cross beam, and the cross beam also serves as an air supply pipe. XCF aerated flotation machine can be widely used for the separation of nonferrous metals, ferrous metals and nonmetallic minerals, and is suitable for roughing and scavenging operations in large and medium-sized flotation plants. Nanjing Sang Highway, Jingxian County, Hengshui City, Hebei Province
Legal Representative: Liu Chunhong.
Establishment time: 20 14-03-03
Registered capital: 5 million yuan.
Industrial and commercial registration number:131127000016772.
Enterprise type: limited liability company (natural person investment or holding)
Company Address: Longhua Industrial Zone, Jingxian County, Hengshui City, Hebei Province