Huiya tile brand introduction
Guangdong Huiya Ceramics is a modern large-scale enterprise. Covering an area of 1000 mu, with a total investment of more than 500 million yuan and strong technical force, Italy introduced 7200 tons of automatic brick press and several large-tonnage presses. It has many advanced production lines at home and abroad, independent R&D departments and professional technicians, and strong independent R&D capability, which has a good response in the industry. At the same time, the company has hired many domestic and foreign experts as technical consultants and established close cooperative relations with many ceramic technology companies.
Huiya tile characteristics
1, water absorption rate: according to national regulations, the water absorption rate is ≤0.5%, which is called porcelain brick, (average value is not more than 0.5%, single value is not more than 0.6%,) water absorption rate 10%, which is porcelain brick.
2. Thermal shock resistance: after 10 thermal shock test, it does not explode or crack.
3. Glaze crack resistance: After the test of glaze crack resistance, there is no crack and peeling on the glaze.
4. Glossy: The gloss of polished tiles is not less than 55.
5. Wear resistance: the depth wear resistance volume of unglazed brick is less than 175mm_.
Selection method of Huiya tile
1. First, determine which parts to use tiles, draw drawings and indicate the dimensions, and calculate the individual areas of different tiles. Including: walls, areas around corners, etc. We must know fairly well. When investigating the market, you can learn from it and sit in the right position according to the size of your favorite color.
2. According to your own preferences, determine the style of using tiles and visit the market. At the same time, further determine whether to use bright brick or inferior smooth brick, slip resistance, color style, etc.
3. When investigating the market, it is necessary to find out the size of common wall and floor tiles. At present, there are many sizes of ceramic tiles, such as: 300*300, 300*450, 300*600, 600*600, etc. , but try to choose common size specifications, and you can choose your design freely.
4. According to the drawing and the size of the wall and floor tile, calculate how big the tile is suitable. If you choose the right one, it will look good and save bricks. Generally speaking, if the paving area is large, choose large-sized bricks, and the area is small, choose small-sized bricks.
Laying method of Huiya tile
Step 1: "Determine the plan". The paving methods of wood grain bricks include herringbone, I-shaped, oblique diamond and so on. There are various laying methods, each with its own advantages.
Step 2: "Leveling". Before laying wood grain bricks, the walls and floors should be treated. Eliminate attachments on the surface.
Step 3: "play the line." Draw with a slender line and white-gray ink, determine the central axis of the brick, and then spread it out.
Step 4: "Choose bricks". It depends on the variety of bricks, and it should be divided well. In case of confusion.
Step 5: "soak bricks". Bricks should be soaked in tap water or clean water, not dirty water; Don't soak it for too long, just soak it.
Step 6: "Mixing". Cement sand is mixed according to the ratio of 1: 2. 325 cement and high-grade cement will cause serious cracks in wood grain bricks.
Step 7: "Paste". Take out the soaked brick, dry the water stains, evenly spread cement slurry on the back of the brick with a thickness of 2-3 cm, spread the brick on the cement sand surface on the ground, and tap the brick surface with a wooden hammer until it is smooth.
Step 8: "Pave the way". Pay attention to the arrow when paving, avoid empty knocking and balance the force.
Step 9: "Prune". Brick laying, wet cement, naked eye observation, wood grain brick finishing according to the standard. Find the problem and fix it immediately.
Step 10: joint filling. If you want to fill the joint, after the cement is dry, tick the joint with an iron hook, and then fill the joint with a joint filler.