Question 2: How to set the polar route? Hello! The setting method of polar router is as follows:
1. First, turn on the power, and plug one end of the power adapter that comes with the equipment into the power hole of the router, and the other end into the power socket. Then, connect the WAN port line and connect the modem or residential broadband network cable to the Internet port of the router. Thirdly, connect the LAN port line, and then use a network cable to connect one end of the router to any LAN port and the other end to the computer network card (desktop or notebook).
2. Turn on the computer, right-click "Network Neighborhood" on the desktop, and open the properties. Right-click Local Area Connection again to open the properties.
3. Select "Internet Protocol (TCP/IP)" in the General tab, click "Properties", and select "Automatically obtain IP address" and "Automatically obtain DNS server address".
4. Open the browser. Taking IE as an example, enter:192.168.0.1in the address bar to log in to the management interface of the router and configure the router.
5. Set the WAN port, that is, the setting of Internet port. This step is mainly to set the user's current internet access type, which is generally divided into PPPoE, dynamic IP, static IP, PPTP, L2TP and so on. Most home users use ADSL or PPPoE in residential broadband, while companies use static IP to access the Internet. Users don't have to worry too much about what kind of internet access method to use here, because the intelligent router will automatically detect the user's internet access type. If the user accidentally loses his user name and password, he can consult the broadband access provider.
6. At present, the default password of admin is empty, which is too unsafe. If neighbors use wireless networks, they can also set up this router, so you need to add a new password for admin. Click the Maintenance tab, enter a new password, and then click "Save Settings", and the router will automatically restart to make the changes take effect. Users can also change their user names if they want. When re-entering, you need to enter your user name and password. If there is no password, you have no right to modify the settings of the router.
7. Save the settings and restart the router.
Question 3: How to set the password of polar router? The settings of polar router are basically the same as those of most ordinary routers. Its password includes WiFi password and login administrator password. The setting method is as follows:
First, the router is initialized and reset, and factory settings are restored (very important). Then connect the computer network card to the LAN port of the router with a network cable, and the router is turned on. Computer network card settings192 5438+068.438+0.2;
Double-click IE browser on the computer, enter the IP address of the router default setting page in the address bar: 192. 168. 1, and press enter;
Enter the default user name: admin and default password: admin; Click OK.
1, set dial-up account:
Click the installation wizard in the left column, and then click Next;
Click ADSL Virtual Dialing (PPPOE), and then click Next;
Enter the broadband account number and password, and click Next;
2. Set the wireless wifi password:
There is also an option in the wireless settings on the left. There is an ssid, which is a wireless account of WiFi. After setting, there is also a password setting. The password should be as complex as possible, preferably a combination of alphanumeric symbols.
3. Set the login password
Change the default administrator and administrator login password to prevent someone from modifying the router after cracking the password and destroying the network.
Click Save and Restart to complete the operation.
Question 4: How to set up a dial-up Internet router with polar routing? If you enter hiwifi or192438+068.438+099.6438+0, the settings page cannot be opened.
2. Click "Two-step Settings, and surf the Internet immediately"
Click "two-step setup, surf the Internet immediately"
3. Select the Internet access mode and set up Internet access.
Here we can see that there are three options: broadband dial-up, automatic internet access and other ways. In fact, the way of surfing the Internet is determined by the type of broadband service handled by users, or by the network environment where polar routing is installed, and it is not optional. Here's how to choose:
(1), broadband dialing
When broadband is enabled, the broadband operator provides you with a broadband account and password. When you don't use the router to access the Internet, you need to use the "broadband connection" (or similar dialing program) on your computer to fill in the broadband account and password to dial up the Internet.
Then, when setting up polar routing Internet access, you should choose the Internet access method: broadband dialing-> Fill in "broadband account": Internet access account provided by the operator-> Fill in "broadband password": Internet access password provided by the operator-> Click "Internet access now".
Setting up broadband dial-up internet access in polar routing
Important note:
Broadband account number and broadband password are provided by your broadband operator. Please fill them in correctly. If you fill in the wrong form, you can't surf the internet; According to statistics, more than 75% users can't surf the Internet after setting up because they filled in the wrong broadband account and password.
(2), automatic Internet access
When broadband is enabled, the operator will provide you with any information; Without a router, you can surf the Internet by connecting a computer with a broadband network cable.
Then, when setting up the polar route to surf the Internet, you should choose the way to surf the Internet: automatic surfing-> click "surf the Internet now".
Setting up Automatic Internet Access in polar Routing
Important note:
When the polar routing router is used as a secondary router, that is, when the polar routing router is connected to a router or switch that can already access the Internet, it should also choose: dynamic IP Internet access.
(3), static IP Internet access
After broadband is enabled, the operator will provide you with static IP address, subnet mask, default gateway and DNS information. When the router is not used, you need to fill in the static IP address information provided by the broadband operator in the local connection (Ethernet) of the computer before the computer can access the Internet.
Then, when setting the polar route to access the Internet, you should choose the Internet access mode: other modes-> static IP Internet access-> and then fill in the IP address, subnet mask, default gateway and DNS provided by the broadband operator.
Choice of Internet Access Mode in Polar Routing: Static IP Internet Access
Set the parameters required for static IP Internet access in polar routing.
(4), wireless relay Internet access
If you plan to use polar routing to amplify the WiFi signal of routers connected to the Internet.
Then, when setting up the polar routing Internet access, you should choose the Internet access mode: Other modes-> Wireless Relay Internet access, and then click Search Network to make relevant settings.
Choice of Internet Access Mode in Polar Routing: Wireless Relay Internet Access
Configure wireless relay in pole wiring
4. set "WiFi name" and "WiFi password"->; At the same time, it is suggested to check "Set the same management password and WiFi password", as shown in the figure below.
Set WiFi name and password in polar routing.
Pay attention to this question:
(1), please check "Set the same management password and WiFi password"; When checked, the management password (login password) of polar routing is the same as WiFi. I strongly recommend that you check this.
(2) WiFi name, it is recommended to use letters and numbers instead of Chinese characters.
(3), WiFi password, it is recommended to use the combination of uppercase letters+lowercase letters+numbers+symbols to set.
5. In the pop-up prompt box, click: Got it.
Click: Got it.
6. System configuration related settings
The electrode wiring is in the configuration setting parameters.
7. Setup is complete
Configuration complete ... >>
Question 5: Is it silly to set up wifi for polar routing? How to set the router's initial password as admin? Here are the router and setup steps:
1. Connect the line between the network cable, router and computer, and start the computer and router equipment;
2. After starting the device, open the browser and enter 192. 168. 1 in the address bar to enter the wireless router setting interface. If you can't get in, please look at the nameplate at the bottom of the router or the instruction manual of the router. The default settings of different types of routers are different. )
3. The account and password used to log in to the router will appear in the setup interface. Enter the default account and password admin, or refer to the instruction manual.
4. After logging in successfully, select the setting wizard interface, which will pop up automatically by default;
5. After selecting the setup wizard, a window will pop up to explain. You can set the basic parameters of the router through the wizard and click Next.
6. According to the step-by-step setup of the setup wizard, select the Internet access mode. Usually ADSL users choose the first PPPoE. If you use other network service providers, choose the following two items according to the actual situation. If you don't know how to choose, automatically choose the first item, which is convenient for beginners to operate. Select and click Next.
7. Enter the account number and password applied from the network service provider, and go directly to the next step after the input is completed;
8. Set the wifi password, and try to make the alphanumeric combination more complicated and not easy to be hacked.
9. If the input is correct, you will be prompted whether to restart the router. Select Yes to confirm to restart the router, and then you can surf the Internet normally.
Question 6: How to configure the address of polar routing gateway and change its local connection to 192? 168。 16。 Xx will do, and the subnet mask is 255. 255。 255。 0, the default gateway can be left blank or written as 192. 168。 16。 1。 Enter 192 in the browser after confirmation. 168。 16。 1 can enter the router.
Question 7: How to restore the factory settings of polar routing? Why is it not in the settings? Prepare a paper clip or something with a thin needle and poke it into the RST hole. It feels like pressing a button. Hold it for five seconds. It's loose again At this point, the router will automatically enter the factory recovery state. This will take about two minutes. When the local connection on the computer shows that the connection is normal, the recovery is successful.
Question 8: How to set QOS for intelligent speed limit of polar routing? There are three modes: speed limit mode, intelligent mode and priority mode.
First, concept explanation: speed limit mode: the maximum upload and download speed can be set for each device;
Intelligent mode: dynamically adjust the bandwidth of each device according to the number of internet devices;
Priority mode: Internet access priority can be set for each device;
Two. No matter which mode QOS is started, the setting method is consistent;
Step 1: Enter the polar routing background-Intelligent QOS, select the mode according to the page prompts, and then input the uplink and downlink bandwidths.
Note: the upstream and downstream bandwidth is how big your broadband is, such as 50 megabytes. Write 50 for both uplink and downlink, and then click' Save' (as shown in the figure below).
Step 2: Then set the corresponding parameters in the connected devices in the polar routing background.
To set the "speed limit mode", find the device to speed limit among the connected devices, click it, select "Intelligent Speed Limit" in the drop-down menu, then fill in the uplink speed limit and downlink speed limit in the pop-up dialog box, and click "Set". Note: ① The upstream and downstream speed limits here cannot be greater than the upstream and downstream values of the bandwidth filled in the first step. (2) When filling in the bandwidth, the unit is megabits (Mbps), where the unit is KB, 1M= 1024KB, which is converted by yourself when filling in.
If you set the' smart mode', you don't need to make any settings later, because in this mode, the bandwidth of each device is dynamically adjusted according to the number of Internet devices. To set the priority mode, find the device you want to give priority to among the connected devices, click it and select Set Priority in the drop-down menu, then select the level in the pop-up dialog box and click OK.
Question 9: How to set the polar route How to set the polar route:
The default IP address of polar router is:192.168.5438+099.6438+0. Enter the address in the address bar and press Enter.
After entering the router settings interface, click External Network Settings. Here, you can set the way the router connects to the external network, such as ADSL or fixed IP Internet access. Look at your own network environment and decide how to set it up.
Click Wireless Settings to set the name and password of the wireless router here.
How many people are online is displayed in the middle of the polar route setting surface. Click enter. Here you can disconnect the online device, or limit the speed or change the device name displayed on the router.
Question: 1 0: 802. 1 1 b/g How to set the polar routing channel correctly in the network standard? Although there may be 13 channels in the wireless network, the non-overlapping channels, that is, the channels that do not interfere with each other, are only1,6,/kloc. Does it feel strange? Will different channels also cause interference or overlap? That's true! For example, channel 3 will interfere with 1 ~ 6, channel 9 will interfere with 6 ~ 13 and so on. Therefore, to ensure the stable operation of multiple wireless networks in the same coverage area, it is suggested to use these three channels: 1, 6, 1 1 (or 13). If there are three wireless networks in the office, in order to avoid interference and overlap, 1, 6, 1 1 should be used in turn. For the wireless router used at home, it is recommended to set the channel to 1 or 1 1 to avoid overlapping with other router signals to the greatest extent. Because most people will not modify this setting and keep the default 6 channels. Of course, the 802. 1 1b/g network standard only provides three non-overlapping channels. These available non-overlapping channels are a little small, but they are enough for ordinary families or SOHO wireless networks. If you need more than three wireless networks in your office area, I suggest you use a wireless device supporting the 802. 1 1a standard, which provides more non-overlapping channels. I only introduce small wireless networks for home use here, so all the discussions are aimed at the 802. 1 1b/g network standard.