Question 2: What does EIA need to do? Environmental assessment is to find an environmental testing agency. Such testing institutions have EIA engineers who can do EIA. You can find the relevant EIA engineer of Beijing Jinghuanjian Environmental Quality Testing Center.
Question 3: What information does the company need for EIA? Full name environmental impact assessment report. It is the environmental protection department's predictive assessment of the possible impact on the surrounding environment of this area after the implementation of some major projects. Information 1, project approval or approval from the Development Planning Bureau for new projects 2, project feasibility study report 3, environmental impact registration form or environmental impact assessment book 4, review enterprise scale, nature, type, product description, technological process, etc. 5. It is best to ask the local environmental protection bureau for the EIA report first, so that it can inspect the origin of your company, and then find the local EIA company if possible. There are many EIA companies now.
Question 4: What procedures and qualifications do you need to register an EIA company? Hello, the examination and approval of applying for or upgrading the qualification of EIA companies is very strict now. The EIA company is now an enterprise, and the original institutions such as the Academy of Environmental Sciences have also been transformed into enterprises, and this work is gradually advancing. EIA companies are divided into Grade A and Grade B. Among them, Grade A units can undertake all EIA business approved by environmental protection units above the provincial level, while Grade B units undertake the preparation of EIA documents approved by environmental protection departments below the provincial level, including general project report forms.
Grade A units shall be equipped with more than 20 EIA technicians, with no less than 10 registered environmental assessors, no less than 3 registered environmental assessors of each type, no less than 2 nuclear safety engineers, no less than100000 fixed assets and no less than 3 million industrial and commercial registration capital. Require supporting venues, equipment and personnel; Have sufficient analytical and auditing skills.
Class B units are required to be equipped with more than two technicians 12, and at least six registered environmental assessors. Each category must have at least 2 environmental assessors. The fixed assets are not less than 2 million, and the capital of industrial and commercial registration is not less than 500,000; Have a fixed site, equipment, analysis and audit capabilities.
The general project EIA report has Grade B qualification, with fixed assets of not less than 1 10,000 and industrial and commercial registration capital of not less than 300,000. It has the ability to prepare the general project EIA report, with no less than 8 EIA technicians, including no less than 2 registered environmental assessors.
First of all, it is necessary to provide the Ministry of Environmental Protection with assets certificate, place certificate, staffing certificate, social security certificate and corresponding qualification certificates (environmental appraiser certificate, employment certificate, etc.). ) and labor contracts; Audit opinions of local environmental protection departments at all levels (cities and counties), etc.
For details, please directly consult the EIA Center of the Ministry of Environmental Protection or refer to the environmental impact assessment method.
Question 5: Which enterprises need to do EIA? Who knows? Please answer. For enterprises, there are three situations that need to be assessed:
1. When a newly established enterprise is established, it is necessary to determine whether and what type of environmental assessment is needed according to the nature of the enterprise;
2. When the enterprise needs to go through the formalities in NDRC and other departments for new reconstruction and expansion projects, it needs to go through the pre-approval of environmental protection;
3. Before going public, enterprises need to do environmental impact assessment if they want to obtain environmental protection compliance certificates.
The easiest way to do an enterprise environmental assessment is to understand why you want an environmental assessment first, and then go to the service hall of the Environmental Protection Agency with relevant materials (probably the requirements given to you by the departments of industry and commerce, development and reform, including the certificate issued by the Environmental Protection Agency). The clerk there will determine what type of environmental assessment you want to handle according to your description and material content, and will also give you a list of documents, and then you can find a qualified environmental assessment unit for them to do. In the specific implementation process, the EIA unit will know the general situation, technology and layout of the project, and do some calculation, monitoring, publicity and other work ... When you have prepared all the materials, hand them over to the service hall of the Environmental Protection Bureau and wait quietly.
If you have any questions, please contact q654 1 15365.
Question 6: Excuse me: What is EIA? Does every new enterprise need to do environmental assessment? Which departments are EIA mainly used for? Environmental impact assessment. 20 13 the environmental protection bureau issued a new policy, and the environmental assessment was stricter. If each new enterprise is approved, it must carry out environmental impact assessment. It can be roughly divided into environmental impact assessment report form, report form and registration form, in which the registration form is a free report form. Generally, reports ranging from 3,000 to 50,000 are above 15W. In addition, it also involves serious pollution factors such as heavy metals, and it is necessary to make a special report for expert review. More complicated. Planning Bureau, Development and Reform Commission, Environmental Protection Bureau, etc. Have to collect one.
Question 7: Are there any conditions for the recruitment of EIA units? First of all, you can enter the EIA unit after graduation. After the EIA unit recruits you, it will let you take a certificate called "EIA Employment Certificate". This exam is more difficult. Books with more than 500 pages need a week's training and pass the closed-book exam (60 points). Try whether the environmental planning major can enter the planning department or the design door. As an EIA worker without a work permit, I suggest that you don't engage in the profession of EIA, which is rather tiring.
Question 8: What is enterprise environmental assessment? Check whether the enterprise will have an adverse impact on the surrounding ecological environment and residents' lives in the production process, and the degree of impact will be examined and approved by the environmental protection department. If the EIA is unqualified, the enterprise shall not produce.
Question 9: What kind of enterprises need safety assessment and environmental assessment? According to Article 29 of the Law of People's Republic of China (PRC) on Work Safety, the construction projects of mines and metal smelting and those used for the production, storage and loading and unloading of dangerous goods shall be demonstrated and evaluated in accordance with the relevant provisions of the state. According to the "Regulations on Safety Production License", there are the following provisions: Article 2 The state applies a safety production license system to mining enterprises, construction enterprises and enterprises producing dangerous chemicals, fireworks and firecrackers and civil blasting equipment (hereinafter referred to as enterprises); Article 6 To obtain a safety production license, an enterprise shall meet the conditions for safety production evaluation according to law.
According to Chapter III Environmental Impact Assessment of Construction Projects of the Law of the People's Republic of China on Environmental Impact Assessment, Article 16 The State shall conduct classified management on environmental impact assessment of construction projects according to their environmental impacts. The construction unit shall, in accordance with the following provisions, organize the preparation of an environmental impact report, an environmental impact report form or fill in an environmental impact registration form (hereinafter referred to as an environmental impact assessment document): (1) If it may cause significant environmental impact, it shall prepare an environmental impact report and make a comprehensive assessment of the environmental impact; (two) may cause minor environmental impact, it shall prepare an environmental impact report, environmental impact analysis or special evaluation; (3) If the impact on the environment is not significant and environmental impact assessment is unnecessary, an environmental impact registration form shall be filled in. The catalogue of classified management of environmental impact assessment of construction projects shall be formulated and published by the competent administrative department of environmental protection of the State Council.
Question 10: What is the enterprise environmental impact assessment? Generally speaking, the Environmental Protection Bureau requires you to do an environmental impact assessment, and you should give a pre-trial opinion to the effect that the XX project of XX Company should do an environmental impact assessment in accordance with the relevant provisions of the National Environmental Impact Assessment Law. The pre-trial opinion will tell you whether this EIA is a report or a statement. Books are more expensive and watches are cheaper.
Then take the pre-trial opinions and find a unit with EIA qualification to do EIA.
After the completion of the EIA, take the EIA report to the Environmental Protection Bureau, and the Environmental Protection Bureau will arrange expert review. The review meeting will put forward some opinions on the EIA report of the project. After the meeting, the EIA unit will make amendments according to the minutes of the meeting, and then form a draft for approval. You go to the environmental protection bureau with the approval draft, and the environmental protection bureau will send you the approval. And generally three months later, the Environmental Protection Bureau will come to your place for acceptance, mainly to see whether the environmental protection measures in the EIA report are in place. After the acceptance, it can be officially produced.
This is basically the program. You go to the EIA unit, and they will tell you the detailed process.