The factory has two modern large blast furnaces, 1 and No.3, each with a volume of 2,536 cubic meters, totaling 5,072 cubic meters; 7 vehicle-mounted cooling sintering machines with a total area of 585 square meters. It mainly produces steelmaking pig iron and self-use sinter. The whole factory covers an area of 4 18077 square meters. At the end of the year, the original value of fixed assets was 3,865.438+0.7 billion yuan and the net value was 6,543.8+0.7 billion yuan. Adhering to the production policy of "high quality, high efficiency, low consumption, long life and cleanness", the factory has been constantly exploring the operation rules with Shougang characteristics, and in view of the changes of internal and external conditions, it has thoroughly studied the new problems encountered in production, such as slag series, distribution, hearth erosion and long life, and the blast furnace production has been stable and high for a long time, with greatly reduced consumption. In the whole year, * * produced 4,024,200 tons of iron, and the utilization factor of blast furnace was 2.22 tons/m3. On a daily basis, the coke ratio in the furnace is 424.8 kg/ton, the comprehensive coke ratio is 498.8 kg/ton, the coal ratio is 70. 1 kg/ton, the fuel ratio is 5 17.3 kg/ton, and the process energy consumption is 462.99999996, and the ironworkers work.
Ironmaking plant inherits the fine tradition of enterprise culture, adheres to the production concept of safety, stability, high quality, low consumption and cleanliness, creates the highest benefit at the lowest cost, has strict, scientific, standardized and orderly management concept, strives for perfection and does not lose an inch of quality concept, and is responsible for the environment is the environmental protection concept of being responsible for survival, and has the responsibility concept of being on duty for one minute and being dedicated for 60 seconds. Solidified enterprise spirit, excellent ideas and formed professional ethics constitute the corporate culture system in the new period. The coking plant of Beijing shougang shares Co., Ltd. covers an area of 322,300 square meters, and has five modern large coke ovens with a total equipment of more than 900 sets, with fixed assets of165438+67 million yuan. The annual output of coke in this plant is more than10.9 million tons, and the daily output of coke oven gas is 265,438+10,000 cubic meters. Coal preparation system, gas recovery and purification system, chemical product refining system and inspection and testing system are matched with coke production.
By the end of 2004, there were 65,438+065,438+035 registered employees, of whom 65,438+00% were managers, 27% were junior workers, 44% were intermediate workers, 65,438+07% were senior workers and 2% were technicians.
Coking plant has strong technical force, excellent equipment level, rich experience in production and management, and many technical and economic indicators are at the leading level in the same industry. It is one of the large comprehensive coal processing bases in northern China. In recent years, the coking plant has made new achievements by adhering to the environment, quality, benefit and variety as the center. Among them, dry quenching technology, coal charging and dust removal technology, coking discharge treatment technology and gas recovery technology have reached the domestic leading level. The second steelmaking plant of Beijing shougang shares Co., Ltd. (hereinafter referred to as the second steelmaking plant) is located at the east gate of the first steelmaking plant in Shijingshan, Beijing, covering an area of 28 1 137 square meters. /kloc-0 was completed in August, 1987, and continuous casting was realized in August, 1996. At present, there are 3 2 10-ton converters, 2 hot metal desulfurization stations, LF ladle refining furnace 1 seat, CAS-OB refining furnace 1 seat, 5 billet continuous casting machines and variable slab continuous casting machines 1 set, with an annual production capacity of 5 million tons and fixed assets of more than 3 billion yuan. It is the largest full continuous casting steelmaking plant in Shougang.
The organizational structure of the Second Steelmaking Plant consists of four departments (production planning department, technical research department, equipment department and human resources department), two rooms (factory office and party-mass office) and eight workshops (steelmaking workshop, continuous casting workshop 1, continuous casting workshop 2, continuous casting workshop 3, repair workshop, billet workshop, power workshop and supply workshop). There are 2,227 registered employees, including on-the-job 1975, and 252 left their posts. The average age of registered employees is 36 years old. At present, there are 9 graduate students, 79 undergraduates, junior college students 168, 223 technical secondary schools and others 1748. There are 479 people with technical secondary school education or above, accounting for 2 1.5% of the total number. At present, there are 6 employees with senior titles, 55 employees with intermediate titles and 184 employees with junior titles, and those with professional titles account for 1 1% of the total number. At present, there are 679 employees and 485 members in party member, and party member accounts for 52.3% of the total employees.
The main product specifications of the Second Steelmaking Plant are120 x120-160 x160 mm square billet and crushed slab billet, which can produce high-quality billets for wires, bars and plates with more than 100 series. Among them, seven brands of ship plate steel have passed the production license certification of six international ship plate steel mills such as CCS, GR and ABS. HRB400 hot-rolled ribbed bar for reinforced concrete, boiler pressure vessel plates and low-alloy high-strength steel plate were rated as "Top Ten Famous Products of Shougang". The existing products have been successfully applied to Three Gorges Project, Myanmar Highway Bridge, Lianyungang-Xuzhou Expressway Bridge, Beijing Fourth Ring Road Bridge, Fifth Ring Road Bridge, Shanghai Electric Tower Steel Structure of ge Company, the Fourth Qiantang River Bridge, Tianjin Port Project, etc. , user feedback is good.
In 2004, the Second Steelmaking Plant put forward the strategic goal of "four haves" around the adjustment of the company's strategic structure and guided by the market, that is, "to have a high-grade all-excellent brand, a stable quality recognized by customers, a best domestic environment and a high-quality tenacious team", to increase the innovation of all staff and improve all basic work with varieties as the core. Thanks to the joint efforts of all staff, No.2 Steelmaking Plant won the honorary titles of "Beijing ankang cup Competition Advanced Unit", "Shougang ankang cup Competition Advanced Unit", "Shougang Corporation Safety Production Advanced Unit", "Beijing Public Security Prevention Advanced Unit", "Shijingshan District Environmental Protection Advanced Unit" and "Shougang Corporation Environmental Protection Advanced Unit".
The first wire factory of shougang shares Company, Beijing shougang shares Co., Ltd. The first wire factory is located in Shahe, Changping District, Beijing, covering an area of 400,000 square meters. The factory was first established in 1938, and its name was Zhaoxia Iron Works. After several changes, it was renamed Jianguo Iron Works Co., Ltd., Jianguo Rolling Mill and Beijing No.1 Rolling Mill, and was transferred to Capital Iron and Steel Company on 1982. It was renamed Shougang Wire Rod Factory (1983), First Wire Rod Factory of Capital Iron and Steel Company (1985), First Wire Rod Factory of Shougang (1992) and First Wire Rod Factory of Shougang Corporation (1994). 1985 merged with the galvanized steel pipe factory of capital iron and steel company, and moved from Xizhimen area in Xicheng District of Beijing to Shahe in Changping District of Beijing in the same year. 199910/kloc-0 on October 22nd, as an excellent asset of Shougang, it was transferred to Beijing shougang shares Co., Ltd. and renamed as Beijing shougang shares Co., Ltd. No.1 Wire Rod Factory. At the end of 2004, there were 967 registered employees 142 1 person. 2 senior titles, 37 intermediate titles, 52 junior titles and 32 technicians; There are 35 workers and technicians, 325 senior workers, 385 intermediate workers and 432 junior workers (including Shou Yuan-Wire Rod Workstation), accounting for 2.9%, 27.6%, 32.7% and 36.8% of the operating positions of the whole plant respectively. There are six functional management departments, such as production department, technical research department, human resources department, equipment department, factory office and party-mass work office, and six department-level institutions, such as supply and marketing department, first-line workshop, second-line workshop, third-line workshop, raw material workshop and welding net workshop. The main equipment of three rolling workshops is semi-continuous wire rod mill. The whole factory has steel rolling, lifting, forging, machine maintenance, power, electric power, production and transportation, machinery, electricity, instruments and meters, industrial kiln equipment 1 108 sets, weighing 82 17. 17 tons, the original value. This factory is the earliest building steel production enterprise in China, mainly producing ∮6.5- 12mm standard ordinary wire rod, ∮6.5 specification H08A, SO8A, 08LS, ∮6- 10 mm hot rolled ribbed steel bar and ∮ 5-65438+. The quality and reputation of products have been well received by all walks of life, and won the title of quality products of the former Ministry of Metallurgy for many times. 1997 passed the ISO9002 quality certification and was successfully upgraded to ISO2000 version in 2000. Among them, welded steel mesh is the only similar product in Beijing that has passed ISO9000 quality system certification. All kinds of products have a wide range of international and domestic sales channels and are trusted by users. While attaching importance to products and services, we should pay more attention to the comprehensive social benefits and the sustainable development of enterprises. It has been awarded the title of "Garden Factory" and "Advanced Greening Unit" in Beijing for 0/6 consecutive years. The factory attaches great importance to environmental protection, and the compliance rate of 27 environmental protection indicators reaches 100%. In 2004, it won the honorary titles of Shougang Advanced Safety Production Unit, Shougang ankang cup Award-winning Unit, Shougang Qing 'an Cup Award-winning Unit and Beijing May 4th Red Flag Youth League Committee. Beijing shougang shares Co., Ltd. High-speed Wire Rod Factory (hereinafter referred to as High-speed Wire Rod Factory) was established in July, 20001year, which belongs to Beijing shougang shares Co., Ltd., and is one of the largest high-quality wire rod production bases in China at present, located in Shougang Factory, Shijingshan District. The factory was formed by the merger of the former No.2 Wire Rod Factory of Beijing shougang shares Co., Ltd. and No.3 Wire Rod Factory of Beijing shougang shares Co., Ltd., and was completed and put into operation in February 1987 and February 1993 respectively. At present, there are six departments, including production planning department, technical research department, equipment department, human resources department, office and party-mass work office, as well as two production operation areas (original workshop 1 and workshop 2), and each production operation area has four operation areas respectively. Employees 1206, including 4 senior titles, 42 intermediate titles and 24 junior titles. * * * There are 6 production lines and 457 sets of equipment, with a total installed capacity of 6.5438+0.4 million kilowatts, a total area of 6.5438+0.57 million square meters, and the original value of fixed assets of 65.438+0.494 billion yuan. The production tooling is the third generation high-speed wire rod production line imported from Belgium by Morgan 1986 with the technological level of the 1980s. Over the years, with the goal of "creating excellent products and striving for first-class", the factory has continuously enhanced the market competitiveness of products by tackling key technical problems, improving production technology and strengthening management, and has the production capacity of 65 varieties with a diameter of 5.5-14mm. The quality system of our factory is in accordance with GB/T19002-ISO 9002-/kloc. In August 2002, it was reformed according to the standard of GB/T 1900 1-2000, and passed the examination and certification in March 2003. The high-speed hot-rolled wire rod won the title of "Beijing Famous Brand Product" and "
Beijing customer satisfaction products "and" national customer satisfaction products "; Low-carbon steel hot-rolled wire rod, low-carbon steel hot-rolled wire rod for silk making, high-quality carbon steel hot-rolled wire rod, steel wire rod for welding, carbon steel welding wire rod for gas shielded arc welding and hot-rolled wire rod for prestressed (PC) steel bar won the "Golden Cup Award for Physical Quality of Metallurgical Products". Products are widely used in key projects such as the National Grand Theatre and Olympic venues, and exported to the United States, Brazil, Italy, Japan, South Korea and other countries. In 2004, the factory won the honorary title of "model unit" of Shougang Corporation.